🎯 Find the right ventilation product
Ask our HVAC AI — get specs & recommendation in seconds
🔍
HT-DG158A-B Industrial Dehumidifier product image

HT-DG158A-B Industrial Dehumidifier | 156 L/D Moisture Control

156 industrial dehumidifier for moisture-control projects

MOISTURE CONTROL
156 industrial dehumidifier for moisture-control projects
POWER CHECK
AC220V-50Hz; confirm exact circuit before ordering
SELECTION NOTE
Confirm room load, target humidity and drainage plan before quotation
Add to quote
Industrial moisture control

HT-DG158A-B Industrial Dehumidifier | 156 L/D Moisture Control

HT-DG158A-B is an industrial dehumidifier option for warehouses, production rooms, storage areas and equipment spaces where moisture control affects comfort, corrosion risk, product storage or process stability.

Capacity156 L/D
PowerAC220V-50Hz
Airflow530 m³/h
Selection factors: A 156 L/D unit on single-phase 220 V at 1,400 W. The A/B variants differ, so confirm which one your project needs.
Placement check: keep air inlet and outlet paths clear, plan drainage where needed, and avoid positions where condensate or dust can block airflow.

Selection flow

Project flow

1Humidity loadconfirm whether the A or B build suits the project.
2Drainagecheck litres per day against 156 L/D with margin.
3Air circulationsingle-phase 220 V, circuit sized for 1,400 W.
4Project detailsSend quantity, destination and the documents your project needs.

Application fit

Where this model fits, and what to verify first

Best fitMedium-to-large rooms that need more than 108 L/D but must stay on 220 V.
Check firstWhether the A or B variant matches your project, plus the daily load and drain route.
AvoidAssuming the two variants are interchangeable without checking the datasheet.
Buyer noteHigher capacity than the 138 model on the same single-phase supply, so check which variant your site needs.

Technical Parameters

Published rows: The values below are the published model rows. Confirm the final configuration against the project requirements before order approval.
HT-DG158A-B Industrial Dehumidifier | 156 L/D Moisture Control technical and selection table
ModelDehumidificationVoltageInput powerAirflowSize
HT-DG158A-B156AC220V-50Hz1400530410x385x915

Project confirmation: Confirm the exact model, electrical supply, operating environment, installation space and required documents before final order approval.

Best-fit Applications

This model covers rooms where the moisture load sits between the mid-range and three-phase units. It suits a large workshop or store on single-phase power, with 530 m³/h of circulation to move dry air across the space.

The A and B variants are not identical, so the variant matters as much as the capacity. Confirm which one your project requires, along with the 1,400 W circuit load and the drain arrangement.

  • Large rooms on 220 V: handles a bigger load without a three-phase supply.
  • Storage and workshops: protects stock and tools across a large footprint.
  • Variant-specific sites: where the A or B build suits the installation.

Selection guide

  • Variant: confirm whether the A or B build suits the project.
  • Moisture load: check litres per day against 156 L/D with margin.
  • Air path: use the 530 m³/h circulation across the room.
  • Supply: single-phase 220 V, circuit sized for 1,400 W.
  • Drain route: plan continuous drainage for long running.

What NOT to Buy

HT-DG158A-B Industrial Dehumidifier | 156 L/D Moisture Control technical and selection table
Situation Risk Better action
Variant not confirmed The wrong build may not suit the installation. Match the A or B variant to the site first.
Load above 156 L/D The unit will fall short of target RH. Move to a three-phase model.
No drain plan Continuous running needs a reliable drain. Arrange gravity or pump drainage.
Vague temperature data Cold rooms cut performance. Confirm the working range.

Industrial Dehumidifier Buyer Checklist

Use the source-backed product information on this page as the starting point, then confirm site conditions before approving the final model.

  • Which variant, A or B, suits the project
  • Daily moisture load against 156 L/D
  • Drain method and route
  • 220 V circuit sized for 1,400 W
Selection note

HT-DG158A-B is positioned for industrial workshop and warehouse dehumidification; confirm capacity, drainage and site humidity load before final selection.

Core Engineering Features

HT-DG158A-B Industrial Dehumidifier | 156 L/D Moisture Control set against the published values on this page. Every point below is taken from this model’s own data.

Capacity156 L/D
PowerAC220V-50Hz
Airflow530 m³/h
Dehumidification156
VoltageAC220V-50Hz
Input power1400

Quality Assurance & Warranty

Dehumidifier orders are verified at the factory before shipping, because a unit sized for a humidity target is only useful if it arrives working to that target.

Applied to this model: Capacity 156 L/D, Power AC220V-50Hz. These checks are run against that specification before the unit ships.

Unit-level humidity checkChecks cover compressor start, coil and drain integrity, airflow, humidity sensor response and model-to-table parameter matching.
Documented complianceCE LVD/EMC and RoHS files cover the listed HT, LG and HT-DG dehumidifier families; see the documents section below.
Warranty supportWarranty for dehumidifier orders is confirmed with the quotation for your destination market.
Service parts for dehumidifiersFilters, drain fittings, humidity controllers and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on moisture-control projects, the supply side adapts to your market instead of one fixed cabinet build.

For this model (Capacity 156 L/D, Power AC220V-50Hz), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for dehumidifier orders, including branded cartons and manual inserts.
Capacity and duty-point adjustmentHumidity control range, capacity class and drainage arrangement can be reviewed against your project.
Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.
Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.
Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Documents & Compliance

This dehumidifier series is supported by Linggong Electric CE LVD/EMC and RoHS documentation for the listed HT, LG, HT-DG, LG-DG and LG-D dehumidifier model ranges.

  • CE AttestationM.2025.206.C118876
  • Technical FilesDTCF0509-LVD/EMC and DTCF0509-ROHS
  • ApplicantZhejiang Linggong Electric Appliance Co., Ltd.

Scope boundary: use these documents for the dehumidifier model families listed in the certificates. The DTS1250 SGS performance report is not used here because its applicant/model scope does not match Linggongshare pages.

FAQ

How do I choose dehumidifier capacity?

Check the daily moisture load against 156 L/D, and confirm which variant, A or B, your project needs, because they are not identical. The 530 m³/h circulation then decides how well dry air reaches the room.

Can it run continuously?

Yes, on 220 V at 1,400 W, with a continuous drain in place. Confirm the variant and the circuit before installation, and make sure the load stays within 156 L/D. Service the filter and keep the 530 m³/h air path clear, and check the drain runs without restriction. Match any replacement parts to the correct A or B variant.

Download product catalog PDF

Download the English product catalog PDF for HT-DG158A-B Industrial Dehumidifier | 156 L/D Moisture Control. Use it for model comparison, technical review and inquiry preparation.

Download catalog PDF

Use the exact model, voltage and installation conditions for project selection.

Product inquiry

Confirm the published specifications, then add this product to your quote list.