🎯 Find the right ventilation product
Ask our HVAC AI — get specs & recommendation in seconds
🔍
HT-15NE Industrial Dehumidifier product image

HT-15NE Industrial Dehumidifier | 10 kg/h Moisture Control

10kg/h industrial dehumidifier for moisture-control projects

MOISTURE CONTROL
10kg/h industrial dehumidifier for moisture-control projects
POWER CHECK
380V3N-50Hz; confirm exact circuit before ordering
BEFORE SELECTION
Confirm room load, target humidity and drainage plan before quotation
Add to quote
Industrial moisture control

HT-15NE Constant Temperature Dehumidifier | Industrial Humidity Control

HT-15NE is an industrial dehumidifier option for warehouses, production rooms, storage areas and equipment spaces where moisture control affects comfort, corrosion risk, product storage or process stability.

Capacity10kg/h
Power380V3N-50Hz
Airflow2800 m³/h
Selection factors: A constant-temperature dehumidifier: it controls humidity without the cooling effect a standard unit brings, so room temperature stays stable.
Placement check: keep air inlet and outlet paths clear, plan drainage where needed, and avoid positions where condensate or dust can block airflow.

Selection flow

Project flow

1Humidity loadconfirm both targets, since this unit holds temperature steady.
2Drainagecheck the removal rate against the room load.
3Air circulationuse the 2,800 m³/h circulation across the room.
4Project detailsSend quantity, destination and the documents your project needs.

Application fit

Where this model fits, and what to verify first

Best fitProcess rooms, laboratories and storage areas where humidity must fall but temperature must not.
Check firstThe target humidity and temperature range, plus the three-phase supply and drain.
AvoidUsing a constant-temperature unit where a standard cooling dehumidifier would do, or vice versa.
Buyer noteRated in kg/h rather than L/D, because it is a constant-temperature machine: it removes moisture while holding the room temperature steady.

Technical Parameters

Published rows: The values below are the published model rows. Confirm the final configuration against the project requirements before order approval.
HT-15NE Industrial Dehumidifier | 10 kg/h Moisture Control technical and selection table
ModelDehumidificationVoltageInput powerAirflowSize
HT-15NE10kg/h380V3N-50Hz3.72800770x470x1600

Project confirmation: Confirm the exact model, electrical supply, operating environment, installation space and required documents before final order approval.

Best-fit Applications

This model suits rooms where humidity has to come down but the temperature must stay put: a process room, a lab, or a storage area holding temperature-sensitive goods. A standard dehumidifier cools the air as it dries it, which is not always wanted; this unit keeps temperature stable while removing moisture.

It runs on three-phase 380 V and removes 10 kg/h, with 2,800 m³/h of circulation to distribute dry air. Because it holds temperature as it works, it is the right choice where a cold draught or a temperature drop would spoil the product or the process.

  • Process rooms: removes moisture without shifting the room temperature.
  • Laboratories: keeps humidity under control where temperature must stay stable.
  • Sensitive storage: protects goods that react to both damp and temperature change.

Selection guide

  • Humidity and temperature: confirm both targets, since this unit holds temperature steady.
  • Capacity in kg/h: check the removal rate against the room load.
  • Supply: three-phase 380 V, planned for 3.7 kW.
  • Air path: use the 2,800 m³/h circulation across the room.
  • Drain route: continuous drainage for long running periods.

What NOT to Buy

HT-15NE Industrial Dehumidifier | 10 kg/h Moisture Control technical and selection table
Situation Risk Better action
Temperature drop wanted This unit holds temperature, it does not cool. Use a standard dehumidifier instead.
Load above capacity The unit will miss the humidity target. Confirm the load against 10 kg/h.
Single-phase site It needs three-phase 380 V. Check the supply before ordering.
No drain plan Continuous running needs drainage. Arrange the drain route.

Industrial Dehumidifier Buyer Checklist

Use the source-backed product information on this page as the starting point, then confirm site conditions before approving the final model.

  • Target humidity and the temperature that must be held
  • Removal rate against 10 kg/h
  • Three-phase 380 V supply for 3.7 kW
  • Continuous drain and clearance for a tall cabinet
Selection note

HT-15NE is positioned for temperature-controlled industrial dehumidification; confirm capacity, drainage and site humidity load before final selection.

Core Engineering Features

HT-15NE Constant Temperature Dehumidifier | Industrial Humidity Contro set against the published values on this page. Every point below is taken from this model’s own data.

Capacity10kg/h
Power380V3N-50Hz
Airflow2800 m³/h
Dehumidification10kg/h
Voltage380V3N-50Hz
Input power3.7

Quality Assurance & Warranty

Dehumidifier orders are verified at the factory before shipping, because a unit sized for a humidity target is only useful if it arrives working to that target.

Applied to this model: Capacity 10kg/h, Power 380V3N-50Hz. These checks are run against that specification before the unit ships.

Unit-level humidity checkChecks cover compressor start, coil and drain integrity, airflow, humidity sensor response and model-to-table parameter matching.
Documented complianceCE LVD/EMC and RoHS files cover the listed HT, LG and HT-DG dehumidifier families; see the documents section below.
Warranty supportWarranty for dehumidifier orders is confirmed with the quotation for your destination market.
Service parts for dehumidifiersFilters, drain fittings, humidity controllers and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on moisture-control projects, the supply side adapts to your market instead of one fixed cabinet build.

For this model (Capacity 10kg/h, Power 380V3N-50Hz), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for dehumidifier orders, including branded cartons and manual inserts.
Capacity and duty-point adjustmentHumidity control range, capacity class and drainage arrangement can be reviewed against your project.
Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.
Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.
Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Documents & Compliance

This dehumidifier series is supported by Linggong Electric CE LVD/EMC and RoHS documentation for the listed HT, LG, HT-DG, LG-DG and LG-D dehumidifier model ranges.

  • CE AttestationM.2025.206.C118876
  • Technical FilesDTCF0509-LVD/EMC and DTCF0509-ROHS
  • ApplicantZhejiang Linggong Electric Appliance Co., Ltd.

Scope boundary: use these documents for the dehumidifier model families listed in the certificates. The DTS1250 SGS performance report is not used here because its applicant/model scope does not match Linggongshare pages.

FAQ

How do I choose dehumidifier capacity?

This is a constant-temperature unit, so confirm both the humidity target and the temperature that must be held, then check the load against 10 kg/h. The 2,800 m³/h circulation then covers the room.

Can it run continuously?

Yes, on three-phase 380 V. Because it holds temperature while removing moisture, it suits continuous duty in process and storage rooms where a temperature drop is not acceptable. Clean the filter on schedule, keep the 2,800 m³/h air path clear and the drain free. Because the unit holds temperature as it works, do not confuse its behaviour with a standard cooling dehumidifier during fault-finding.

Download product catalog PDF

Download the English product catalog PDF for HT-15NE Industrial Dehumidifier | 10 kg/h Moisture Control. Use it for model comparison, technical review and inquiry preparation.

Download catalog PDF

Use the exact model, voltage and installation conditions for project selection.

Product inquiry

Confirm the published specifications, then add this product to your quote list.