🎯 Find the right ventilation product
Ask our HVAC AI — get specs & recommendation in seconds
🔍
HT-DG240A1 Industrial Dehumidifier product image

HT-DG240A1 Industrial Dehumidifier | 240 L/D Moisture Control

240 industrial dehumidifier for moisture-control projects

MOISTURE CONTROL
240 industrial dehumidifier for moisture-control projects
POWER CHECK
AC380V/50Hz; confirm exact circuit before ordering
SELECTION NOTE
Confirm room load, target humidity and drainage plan before quotation
Add to quote
Industrial moisture control

HT-DG240A1 Industrial Dehumidifier | 240 L/D High-Capacity Moisture Control

HT-DG240A1 is an industrial dehumidifier option for warehouses, production rooms, storage areas and equipment spaces where moisture control affects comfort, corrosion risk, product storage or process stability.

Capacity240 L/D
PowerAC380V/50Hz
Airflow2200 m³/h
Selection factors: A high-capacity three-phase unit: 240 L/D with 2,200 m³/h of circulation. Built for warehouses and halls that need serious moisture removal.
Placement check: keep air inlet and outlet paths clear, plan drainage where needed, and avoid positions where condensate or dust can block airflow.

Selection flow

Project flow

1Humidity loadconfirm litres per day against 240 L/D with margin.
2Drainagethree-phase 380 V, circuit planned for 2,600 W.
3Air circulationcontinuous drainage is essential at this capacity.
4Project detailsSend quantity, destination and the documents your project needs.

Application fit

Where this model fits, and what to verify first

Best fitWarehouses, large production halls and storage areas with a heavy, continuous moisture load.
Check firstThe real daily load, the three-phase supply, air circulation and the drain route.
AvoidUsing a large unit in a small room, or order it without confirming three-phase power.
Buyer noteOne of the larger models: 2,200 m³/h moves a lot of air, so the room should be big enough to justify it.

Source-backed Technical Parameters

Source-backed rows only: no missing/PDF-absent models are added. Medium-confidence rows keep confirmation notes.
HT-DG240A1 Industrial Dehumidifier | 240 L/D Moisture Control technical and selection table
Source model PIM/page model Dehumidification Voltage Input power Airflow Size Confidence
HT-DG240A1 LG-DG240A1 240 AC380V/50Hz 2600 2200 705x410x1600 high

Source notes:
HT-DG240A1 → LG-DG240A1: high confidence, source page uploaded_image_05; Source uses HT-DG240A1; mapped to existing LG-DG240A1 variant with mismatch note.

Legacy page note: Original page content was backed up before this source-backed UI v4 update.

Best-fit Applications

This unit is built for spaces where moisture is a constant problem: a full warehouse, a large production hall, or a storage area where damp air threatens stock and equipment. The 2,200 m³/h of circulation is what lets dry air reach across a big volume rather than pooling near the machine.

It runs on three-phase 380 V at 2,600 W, so the supply and circuit have to be planned. For a load this size, continuous drainage is not optional: a large unit produces condensate steadily whenever it runs.

  • Warehouses: holds humidity down across a large storage volume all day.
  • Production halls: protects processes and equipment in a humid, busy space.
  • Heavy-load stores: where moisture threatens cartons, metal and finished goods.

Selection guide

  • Moisture load: confirm litres per day against 240 L/D with margin.
  • Supply: three-phase 380 V, circuit planned for 2,600 W.
  • Air path: use the 2,200 m³/h circulation across the whole space.
  • Drain route: continuous drainage is essential at this capacity.
  • Placement: allow clearance around a tall floor-standing cabinet.

What NOT to Buy

HT-DG240A1 Industrial Dehumidifier | 240 L/D Moisture Control technical and selection table
Situation Risk Better action
Room too small A 2,200 m³/h unit is oversized for a small room. Match capacity to the load and volume.
No three-phase power This model will not run on 220 V. Check the HT-DG138A1 or 158A-B instead.
Load not calculated Guessing at capacity wastes money either way. Confirm litres per day first.
No drain plan A continuous unit needs a dependable drain. Arrange drainage before installation.

Industrial Dehumidifier Buyer Checklist

Use the source-backed product information on this page as the starting point, then confirm site conditions before approving the final model.

  • Daily moisture load against 240 L/D
  • Three-phase 380 V supply and circuit for 2,600 W
  • Circulation path for 2,200 m³/h
  • Continuous drain, plus clearance for a tall cabinet
Selection note

HT-DG240A1 is positioned for large workshops, warehouses and storage moisture control; confirm capacity, drainage and site humidity load before final selection.

Core Engineering Features

HT-DG240A1 Industrial Dehumidifier | 240 L/D High-Capacity Moisture Co set against the published values on this page. Every point below is taken from this model’s own data.

Capacity240 L/D
PowerAC380V/50Hz
Airflow2200 m³/h
PIM/page modelLG-DG240A1
Dehumidification240
VoltageAC380V/50Hz

Quality Assurance & Warranty

Dehumidifier orders are verified at the factory before shipping, because a unit sized for a humidity target is only useful if it arrives working to that target.

Applied to this model: Capacity 240 L/D, Power AC380V/50Hz. These checks are run against that specification before the unit ships.

Unit-level humidity checkChecks cover compressor start, coil and drain integrity, airflow, humidity sensor response and model-to-table parameter matching.
Documented complianceCE LVD/EMC and RoHS files cover the listed HT, LG and HT-DG dehumidifier families; see the documents section below.
Warranty supportWarranty for dehumidifier orders is confirmed with the quotation for your destination market.
Service parts for dehumidifiersFilters, drain fittings, humidity controllers and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on moisture-control projects, the supply side adapts to your market instead of one fixed cabinet build.

For this model (Capacity 240 L/D, Power AC380V/50Hz), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for dehumidifier orders, including branded cartons and manual inserts.
Capacity and duty-point adjustmentHumidity control range, capacity class and drainage arrangement can be reviewed against your project.
Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.
Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.
Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Documents & Compliance

This dehumidifier series is supported by Linggong Electric CE LVD/EMC and RoHS documentation for the listed HT, LG, HT-DG, LG-DG and LG-D dehumidifier model ranges.

  • CE AttestationM.2025.206.C118876
  • Technical FilesDTCF0509-LVD/EMC and DTCF0509-ROHS
  • ApplicantZhejiang Linggong Electric Appliance Co., Ltd.

Scope boundary: use these documents for the dehumidifier model families listed in the certificates. The DTS1250 SGS performance report is not used here because its applicant/model scope does not match Linggongshare pages.

FAQ

How do I choose dehumidifier capacity?

Estimate the daily moisture load and check it against 240 L/D. This is a large three-phase unit, so it suits a warehouse or big hall rather than a small room, and the 2,200 m³/h airflow has to fit the space.

Can it run continuously?

Yes, and it is designed for it. At 2,600 W on three-phase 380 V with 2,200 m³/h, continuous duty needs a reliable drain and a properly sized circuit. Keep the air path and the drain clear, clean the filter on schedule, and allow service access around a tall cabinet. At this capacity the unit runs long hours, so the drain is the item to watch.

Why do some model names differ?

Some source rows use HT model codes while the website/PIM layer may use LG model codes. Both are shown to avoid silent normalization.

Download product catalog PDF

Download the English industrial dehumidifier catalog for product-family overview and technical review. Confirm the exact HT model, voltage and installation conditions with our team before relying on it for project selection.

Download catalog PDF

Use the exact model, voltage and installation conditions for project selection.

Product inquiry

Confirm the published specifications, then add this product to your quote list.