🎯 Find the right ventilation product
Ask our HVAC AI — get specs & recommendation in seconds
🔍
In-Line Series

In-Line Series

In-Line Series duct fan for standard inline ventilation in residential and light commercial duct systems

PROJECT FIT
In-Line Series duct fan for standard inline ventilation in residential and light commercial duct systems
PERFORMANCE RANGE
Single model · inline duct fan · standard ventilation · residential and light commercial
Add to quote

Source-backed In-Line Series parameters

Published source: KCVENTS In-Line Series technical tables. Confirm H/L operating point and duct size for final model selection.

Model Voltage (V) Frequency (Hz) Gear Power (W) Airflow (m³/h) Static Pressure (Pa) Noise (dB) Duct Size (mm) Application Area (m²) N.M (kg) Box/Piece
DPT10-11 220 50 H/L 28/23 150/100 65/55 40/35 φ100 6–10 2.3 8
DPT10-11F 220 50 H/L 30/26 250/180 106/80 45/40 φ100 10–12 2.3 8
DPT15-34 220 50 H/L 33/27 400/300 127/120 42/38 φ150 10–25 3.5 4
DPT15-34F 220 50 H/L 70/53 600/500 170/150 46/42 φ150 10–25 4.6 4
DPT20-45F 220 50 H/L 120/106 900/750 207/190 48/46 φ200 25–38 7.8 1
DPT20-65F 220 50 H/L 190/180 1500/1350 220/200 52/50 φ200 48–80 8.5 1
DPT20-75 220 50 H/L 270/265 2100/1800 380/290 62/55 φ200 80–90 10.5 1

Selection Snapshot

In-Line Series is organized here as a buyer-facing industrial HVAC product page. Use this page to confirm the project fit, selection checks and quotation details for product selection.

Performance & Specification Policy

In-Line Series technical and selection table
Item Selection factors Why it matters
Exact model Confirm by model nameplate or datasheet Avoids mixing similar series or legacy SKUs
Airflow / capacity Confirm required duty point for quote review Keeps selection tied to the project condition
Installation Confirm mounting method, voltage/frequency and site restrictions Reduces mismatch during procurement

Typical Applications

Project fit

Industrial ventilation selection.

Spec reference

Numeric parameters should be finalized only from source records or the latest datasheet.

Selection factors

  1. Share the target application and installation location.
  2. Confirm exact model, voltage/frequency and duty requirement.
  3. Check whether any certificates, drawings or special materials are required.
  4. Send the confirmed model, site conditions and required documents for quotation.

Compare the options

Compare this product by exact model, duty point, installation method, site environment, support documents and after-sales requirements, not by title alone.

Core Engineering Features

Source-backed In-Line Series parameters set against the published values on this page. Every point below is taken from this model’s own data.

Project fitIndustrial ventilation selection.
Spec referenceNumeric parameters should be finalized only from source records or the latest datasheet.
Voltage (V)220
Frequency (Hz)50
GearH/L
Power (W)28/23

Quality Assurance & Warranty

Fan orders are checked at the factory before shipping, because published airflow and pressure only hold if the delivered unit matches its table row.

Applied to this model: Project fit Industrial ventilation selection., Spec reference Numeric parameters should be finalized only from source records or the latest datasheet.. These checks are run against that specification before the unit ships.

Airflow and pressure checkChecks cover motor start-up, impeller balance, airflow and static pressure verification, noise review and model-to-table parameter matching.
Documented complianceCE, RoHS and related files cover the listed fan families; see the documents section below.
Warranty supportWarranty for fan orders is confirmed with the quotation for your destination market.
Service parts for fansImpellers, motor capacitors, mounting brackets and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on ventilation projects, the supply side adapts to your market instead of one fixed fan build.

For this model (Project fit Industrial ventilation selection., Spec reference Numeric parameters should be finalized only from source records or the latest datasheet.), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for fan orders, including branded cartons and manual inserts.
Airflow and pressure variantsModel selection, motor power and voltage options are reviewed against your duct calculation.
Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.
Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.
Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Documents & Compliance

Download the In-Line Series datasheet used for the technical values on this page, and review the relevant compliance documents.

Confirm the exact model, destination-market requirements and current documentation before quotation or project documentation.

View all certifications and compliance documents by product scope

Frequently Asked Questions

Can Linggongshare recommend a model directly?

Yes. Send the application, airflow or capacity target, installation constraints and power supply. The team can help narrow the model range.

Are all technical values final on this page?

For safety, final selection should be confirmed against the latest exact-model datasheet or source parameter record.

Product inquiry

Confirm the published specifications, then add this product to your quote list.

model

, , , , , ,