Grow Room Inline Fan

Inline duct fan selection

Selection Snapshot

Use this page to confirm fit for Grow Room Inline Fan. Model-specific parameters are maintained in the internal source database; final quotation still depends on exact duct diameter, route resistance and installation conditions.

Image note: use product photo for shape recognition only; confirm duct diameter and exact model row before engineering review.

Project fitinline grow-room ventilation fan

Applicationgrow tent and plant-room air exchange with duct routing

Project detailsConfirm duct diameter, canopy heat load, airflow target, duct length, bends, filter resistance, voltage/frequency and noise target

Source note

Model-specific parameter rows are maintained in the internal source database. Do not copy values across unrelated duct fan pages.

Specification policy

Use the exact model row for selection

Grow Room Inline Fan technical and selection table
Spec item	How to use it	Buyer check
Airflow	Use the exact model-specific source row	Match room volume and ventilation objective.
Static pressure	Check against duct length, bends and outlet resistance	Do not choose by airflow alone.
Noise	Use documented checks dBA value and installation context	Confirm if the fan is near occupied areas.
Voltage/frequency	Confirm before order	Match local project power supply.

Application fit

Where this inline duct fan fits

Grow Room Inline Fan is suited for grow tent and plant-room air exchange with duct routing where the buyer needs compact inline installation and a defined duct route.

For long duct runs, multiple bends, filter resistance or strict noise targets, confirm static pressure instead of selecting by nominal airflow only.

Send these details

Duct diameter and duct length
Number of bends and outlet type
Airflow target and noise limit
Voltage/frequency and quantity

Core Engineering Features

Use the exact model row for selection set against the published values on this page. Every point below is taken from this model’s own data.

Project fitinline grow-room ventilation fan

Applicationgrow tent and plant-room air exchange with duct routing

Project detailsConfirm duct diameter, canopy heat load, airflow target, duct length, bends, filter resistance, voltage/frequency and noise target

How to use itUse the exact model-specific source row

Buyer checkMatch room volume and ventilation objective.

Quality Assurance & Warranty

Fan orders are checked at the factory before shipping, because published airflow and pressure only hold if the delivered unit matches its table row.

Applied to this model: Project fit inline grow-room ventilation fan, Application grow tent and plant-room air exchange with duct routing. These checks are run against that specification before the unit ships.

Airflow and pressure checkChecks cover motor start-up, impeller balance, airflow and static pressure verification, noise review and model-to-table parameter matching.

Documented complianceCE, RoHS and related files cover the listed fan families; see the documents section below.

Warranty supportWarranty for fan orders is confirmed with the quotation for your destination market.

Service parts for fansImpellers, motor capacitors, mounting brackets and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on ventilation projects, the supply side adapts to your market instead of one fixed fan build.

For this model (Project fit inline grow-room ventilation fan, Application grow tent and plant-room air exchange with duct routing), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for fan orders, including branded cartons and manual inserts.

Airflow and pressure variantsModel selection, motor power and voltage options are reviewed against your duct calculation.

Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.

Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.

Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Documents & Compliance

Download the grow room inline fan DPT-H series datasheet (PDF) used for the technical values on this page.

Download grow room inline fan DPT-H series datasheet (PDF)

Confirm the exact model and current documentation before quotation or project documentation.

View all certifications and compliance documents by product scope

Frequently asked questions

Can I choose by duct diameter only?

No. Duct diameter is only the starting point. Confirm airflow, static pressure, duct length and bends.

Why confirm static pressure?

Long ducts, filters and bends reduce actual airflow. Static pressure helps avoid under-selection.

What information is needed for quote?

Send duct diameter, route, airflow target, duct length, bends, outlet type, voltage/frequency, quantity and destination.

DIMENSIONS

Model size reference

Model	L	L1	L2	W	W1	H	H1	D
DPT10-24H	533	352	251	397	447	121	30	φ100
DPT15-34H	504	352	251	397	447	196	30	φ150
DPT15-45H	504	352	251	397	447	196	30	φ150
DPT20-56H	531	353	251	397	447	246	30	φ200
DPT20-66H	531	353	251	397	447	246	30	φ200

PERFORMANCE

Performance reference

Model	Voltage(V)	Frequency(Hz)	Gear	Power(W)	Airflow(m³/h)	Static Pressure(Pa)	Noise(dB)	Duct Size(mm)	Application Area(m²)	N.M(kg)
DPT10-24H	220	50	H/L	48/38	230/180	160	25	φ100	8-15	6.5
DPT15-34H	220	50	H/L	60/45	350/250	220	30	φ150	20-25	8.4
DPT15-45H	220	50	H/L	84/78	500/420	260	34	φ150	25-30	8.8
DPT20-56H	220	50	H/L	104/80	920/700	365	38	φ200	40-47	10.5
DPT20-66H	220	50	H/L	135/103	1200/1050	410	45	φ200	40-60	10.6

PERFORMANCE CURVE

Performance curve chart

Use the performance curve chart to compare airflow against static pressure for the available model range.

Product inquiry

Confirm the published specifications, then add this product to your quote list.