🎯 Find the right ventilation product
Ask our HVAC AI — get specs & recommendation in seconds
🔍
HT-DG168A1 / HT-DG168B Industrial Dehumidifier product image

HT-DG168A1 / HT-DG168B Industrial Dehumidifier | 168 L/D Moisture Control

168 industrial dehumidifier for moisture-control projects

MOISTURE CONTROL
168 industrial dehumidifier for moisture-control projects
POWER CHECK
AC380V-50Hz; confirm exact circuit before ordering
SELECTION NOTE
Confirm room load, target humidity and drainage plan before quotation
Add to quote
Industrial moisture control

HT-DG168A1 / HT-DG168B Industrial Dehumidifier | 168 L/D Moisture Control

HT-DG168A1, HT-DG168B is an industrial dehumidifier option for warehouses, production rooms, storage areas and equipment spaces where moisture control affects comfort, corrosion risk, product storage or process stability.

Capacity168 L/D
PowerAC380V-50Hz
Airflow1600 m³/h
Selection factors: The first step into three-phase territory: 168 L/D with 1,600 m³/h. The A variant runs on 380 V, the B variant on 220 V, so the supply decides which one fits.
Placement check: keep air inlet and outlet paths clear, plan drainage where needed, and avoid positions where condensate or dust can block airflow.

Selection flow

Project flow

1Humidity loadchoose the A (380 V) or B (220 V) build for the site.
2Drainageconfirm litres per day against 168 L/D.
3Air circulationplan continuous drainage for a large unit.
4Project detailsSend quantity, destination and the documents your project needs.

Application fit

Where this model fits, and what to verify first

Best fitLarge workshops, warehouses and production halls where the load has outgrown single-phase units.
Check firstWhich variant matches your supply, plus the load, air path and drain.
AvoidOrdering the wrong variant for the site voltage.
Buyer noteTwo variants share the same capacity but differ on supply, so the site voltage is the first question.

Source-backed Technical Parameters

Source-backed rows only: no missing/PDF-absent models are added. Medium-confidence rows keep confirmation notes.
HT-DG168A1 / HT-DG168B Industrial Dehumidifier | 168 L/D Moisture Control technical and selection table
Source model PIM/page model Dehumidification Voltage Input power Airflow Size Confidence
HT-DG168A1 LG-DG168A1 168 AC380V-50Hz 2000 1600 605x410x1600 medium
HT-DG168B HT-DG168B 168 AC220V-50Hz 2000 1600 605x410x1600 medium

Source notes:
HT-DG168A1 → LG-DG168A1: medium confidence, source page uploaded_image_06; Shared two-column source image lists HT-DG168B and HT-DG168A1. OCR alignment uncertain for timer/airflow/noise; mapped HT-DG168A1 to LG-DG168A1.
HT-DG168B → HT-DG168B: medium confidence, source page uploaded_image_06; Shared two-column uploaded source image; HT-DG168B is 220V version.

Legacy page note: Original page content was backed up before this source-backed UI v4 update.

Best-fit Applications

This model takes the range into larger spaces. With 168 L/D and 1,600 m³/h of circulation, it suits a warehouse or production hall where a single-phase unit would run non-stop and still fall short.

The variant choice is the key decision: the A build uses 380 V three-phase and the B build uses 220 V. Both deliver the same capacity, so confirm the site supply before ordering, and plan the 2,000 W load and the drain for continuous running.

  • Warehouses: holds humidity down across a large storage volume.
  • Production halls: keeps conditions stable where damp air affects processes.
  • Mixed-supply sites: where the A or B variant matches the power available.

Selection guide

  • Supply and variant: choose the A (380 V) or B (220 V) build for the site.
  • Moisture load: confirm litres per day against 168 L/D.
  • Air path: use the 1,600 m³/h circulation across the hall.
  • Drain route: plan continuous drainage for a large unit.
  • Placement: allow clearance around a tall, floor-standing cabinet.

What NOT to Buy

HT-DG168A1 / HT-DG168B Industrial Dehumidifier | 168 L/D Moisture Control technical and selection table
Situation Risk Better action
Wrong variant A 380 V unit will not run on a 220 V site, and vice versa. Confirm the supply before ordering.
Load above 168 L/D Capacity falls short in a very large space. Compare the 240 L/D model.
Ignoring air path A large unit still needs clear circulation. Check clearances and airflow.
No continuous drain A big unit produces condensate steadily. Plan drainage before installation.

Industrial Dehumidifier Buyer Checklist

Use the source-backed product information on this page as the starting point, then confirm site conditions before approving the final model.

  • Site voltage, to pick the A or B variant
  • Daily moisture load against 168 L/D
  • Circulation path for 1,600 m³/h
  • Continuous drain and clearance for a tall cabinet
Selection note

HT-DG168A1 / HT-DG168B is positioned for industrial humidity control; confirm capacity, drainage and site humidity load before final selection.

Core Engineering Features

HT-DG168A1 / HT-DG168B Industrial Dehumidifier | 168 L/D Moisture Cont set against the published values on this page. Every point below is taken from this model’s own data.

Capacity168 L/D
PowerAC380V-50Hz
Airflow1600 m³/h
PIM/page modelLG-DG168A1
Dehumidification168
VoltageAC380V-50Hz

Quality Assurance & Warranty

Dehumidifier orders are verified at the factory before shipping, because a unit sized for a humidity target is only useful if it arrives working to that target.

Applied to this model: Capacity 168 L/D, Power AC380V-50Hz. These checks are run against that specification before the unit ships.

Unit-level humidity checkChecks cover compressor start, coil and drain integrity, airflow, humidity sensor response and model-to-table parameter matching.
Documented complianceCE LVD/EMC and RoHS files cover the listed HT, LG and HT-DG dehumidifier families; see the documents section below.
Warranty supportWarranty for dehumidifier orders is confirmed with the quotation for your destination market.
Service parts for dehumidifiersFilters, drain fittings, humidity controllers and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on moisture-control projects, the supply side adapts to your market instead of one fixed cabinet build.

For this model (Capacity 168 L/D, Power AC380V-50Hz), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for dehumidifier orders, including branded cartons and manual inserts.
Capacity and duty-point adjustmentHumidity control range, capacity class and drainage arrangement can be reviewed against your project.
Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.
Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.
Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Documents & Compliance

This dehumidifier series is supported by Linggong Electric CE LVD/EMC and RoHS documentation for the listed HT, LG, HT-DG, LG-DG and LG-D dehumidifier model ranges.

  • CE AttestationM.2025.206.C118876
  • Technical FilesDTCF0509-LVD/EMC and DTCF0509-ROHS
  • ApplicantZhejiang Linggong Electric Appliance Co., Ltd.

Scope boundary: use these documents for the dehumidifier model families listed in the certificates. The DTS1250 SGS performance report is not used here because its applicant/model scope does not match Linggongshare pages.

FAQ

How do I choose dehumidifier capacity?

Check the daily load against 168 L/D, and decide the variant first: the A build is 380 V and the B build is 220 V, so the site supply picks the model. The 1,600 m³/h circulation then covers a large hall.

Can it run continuously?

Yes. With 1,600 m³/h and 2,000 W it is built for continuous running, provided the drain and the correct variant are confirmed. Plan the circuit for 2,000 W. Keep the air path and drain clear on a tall floor-standing unit, and clean the filter on schedule. Confirm service access before installation, because a large cabinet needs room to be worked on.

Why do some model names differ?

Some source rows use HT model codes while the website/PIM layer may use LG model codes. Both are shown to avoid silent normalization.

Download product catalog PDF

Download the English industrial dehumidifier catalog for product-family overview and technical review. Confirm the exact HT model, voltage and installation conditions with our team before relying on it for project selection.

Download catalog PDF

Use the exact model, voltage and installation conditions for project selection.

Product inquiry

Confirm the published specifications, then add this product to your quote list.