🎯 Find the right ventilation product
Ask our HVAC AI — get specs & recommendation in seconds
🔍
Home Fresh Air Ventilator

Home Fresh Air Ventilator

Home Fresh Air Ventilator for residential fresh-air supply with balanced airflow and compact installation

PROJECT FIT
Home Fresh Air Ventilator for residential fresh-air supply with balanced airflow and compact installation
PERFORMANCE RANGE
Single model · home fresh air supply · compact design for residential ventilation
Add to quote

Selection Snapshot

Home Fresh Air Ventilator supports fresh-air duct ventilation projects where airflow, duct route, noise requirement and exact model row must be confirmed for quote review.

Whole-House ERV Models

Values are transcribed from the cited catalogue page. Confirm project voltage, installation conditions and the exact model before ordering.

Model Voltage Speed Power Airflow Static pressure Noise Duct
KCQR-150 220 V / 50 Hz H / L 100 / 76 W 150 / 120 m³/h 200 / 170 Pa 37 / 35 dB 100 mm
KCQR-350 220 V / 50 Hz H / L 200 / 160 W 350 / 250 m³/h 230 / 200 Pa 41 / 39 dB 150 mm
KCQR-500 220 V / 50 Hz H / L 230 / 177 W 550 / 400 m³/h 255 / 240 Pa 42 / 40 dB 200 mm

Source: CHIC HVAC 2026 Catalogue, p. 14.

Performance & Specification Policy

Home Fresh Air Ventilator technical and selection table
Item Selection factors Why it matters
Exact model Confirm by model nameplate or datasheet Avoids mixing similar series or legacy SKUs
Airflow / capacity Confirm required duty point for quote review Keeps selection tied to the project condition
Installation Confirm mounting method, voltage/frequency and site restrictions Reduces mismatch during procurement

Typical Applications

Project fit

Fresh-air duct ventilation.

Spec reference

Numeric parameters should be finalized only from source records or the latest datasheet.

Selection factors

  1. Share the target application and installation location.
  2. Confirm exact model, voltage/frequency and duty requirement.
  3. Check whether any certificates, drawings or special materials are required.
  4. Send the confirmed model, site conditions and required documents for quotation.

Compare the options

Compare this product by exact model, duty point, installation method, site environment, support documents and after-sales requirements, not by title alone.

Frequently Asked Questions

Can Linggongshare recommend a model directly?

Yes. Send the application, airflow or capacity target, installation constraints and power supply. The team can help narrow the model range.

Are all technical values final on this page?

For safety, final selection should be confirmed against the latest exact-model datasheet or source parameter record.

Core Engineering Features

Selection Snapshot set against the published values on this page. Every point below is taken from this model’s own data.

Project fitFresh-air duct ventilation.
Spec referenceNumeric parameters should be finalized only from source records or the latest datasheet.
Voltage220 V / 50 Hz
SpeedH / L
Power100 / 76 W
Airflow150 / 120 m³/h

Quality Assurance & Warranty

Fan orders are checked at the factory before shipping, because published airflow and pressure only hold if the delivered unit matches its table row.

Applied to this model: Project fit Fresh-air duct ventilation., Spec reference Numeric parameters should be finalized only from source records or the latest datasheet.. These checks are run against that specification before the unit ships.

Airflow and pressure checkChecks cover motor start-up, impeller balance, airflow and static pressure verification, noise review and model-to-table parameter matching.
Documented complianceCE, RoHS and related files cover the listed fan families; see the documents section below.
Warranty supportWarranty for fan orders is confirmed with the quotation for your destination market.
Service parts for fansImpellers, motor capacitors, mounting brackets and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on ventilation projects, the supply side adapts to your market instead of one fixed fan build.

For this model (Project fit Fresh-air duct ventilation., Spec reference Numeric parameters should be finalized only from source records or the latest datasheet.), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for fan orders, including branded cartons and manual inserts.
Airflow and pressure variantsModel selection, motor power and voltage options are reviewed against your duct calculation.
Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.
Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.
Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Product inquiry

Confirm the published specifications, then add this product to your quote list.







model

, ,