What information should I send before quotation?

Send model, target area, voltage/frequency, site conditions, quantity, delivery region and required documents.

Are the listed parameters final for ordering?

Use the listed parameters as source-backed reference data and confirm the exact model datasheet and site conditions before final specification.

Can Linggongshare help with model selection?

Yes. Use the inquiry button and include site conditions so the team can confirm a suitable model before quotation.

LHWS-2026A Industrial Oil-Fired Heater

Product overview

LHWS-2026A oil-fired heater selection snapshot

Compare the published heating capacity, fuel type, power supply and site requirements below before reviewing the installation conditions and quote.

Use case

Industrial warm-air heating projects that need an oil-fired heater configuration.

Selection factor

Confirm heating capacity, fuel arrangement, power supply, site ventilation, safety clearance and target room size for quote review.

Buyer value

Use the original product data below as the starting point; final selection should be confirmed against the latest model datasheet or source-backed record.

Performance & product information

Procurement note: Check exact model, duty point, installation conditions and required documents for product selection. Numeric values below are preserved from the existing product content and should be confirmed before final ordering.

Technical Parameter

Model	LHWS-2026A
Item	Industrial Oil Fired Heater
Rated voltage	220v-50Hz
Rated power	60KW
Product size	990X740X515mm
Packing dimensions	1010X430X570mm
Net weight	27kg
Gross weight	30.5kg
Air volume	1100m³/h
Tank size	56L
Oil consumption	2.0-4.0kg/h

LHWS-2026A selection notes

Buyer decision panel

LHWS-2026A selection snapshot

Heating modeoil-fired warm air

Site focusindustrial warm-air heating

Before orderVentilation + fuel handling

Documentsconfirm datasheet before final specification

Top-tier selection rule: do not approve the model from capacity alone. Confirm site load, power supply, airflow/drainage/ventilation path and delivery requirements for quote review.

Selection flow

Project flow

1Heat loadShare area, ceiling height and target temperature rise.

2VentilationConfirm fuel handling and ventilation condition.

3Safety clearanceCheck indoor/outdoor use and clearance around outlet.

4Project detailsSend quantity, destination and required documents.

Application fit

Where this model fits, and what to verify first

Best fitIndustrial warm-air heating where fuel-fired operation is acceptable.

Check firstVentilation, fuel handling and safety clearance.

AvoidSites where fuel-fired heating or exhaust management is not allowed.

Buyer noteUse as buyer checklist; confirm exact datasheet for final selection.

Oil-Fired Heater Buyer Checklist

Use the source-backed product information on this page as the starting point, then confirm site conditions before approving the final model.

Heating area, ceiling height and expected temperature rise
Ventilation condition and fuel handling requirements
Required safety clearance and indoor/outdoor use
Quantity, delivery region and quotation documents

Typical Applications

workshop heating, temporary industrial heating, warehouse heating and large-area warm-air support.

Project fit

Use this product when the project conditions match the product family and installation environment.

Procurement note

Share operating conditions so Linggongshare can confirm whether this model is suitable.

Compare the options

Compare against electric heater fans when fuel availability, ventilation and operating scenario are different.

LHWS-2026A Industrial Oil-Fired Heater purchase comparison checkpoints
Checkpoint	Selection factors	Why it matters
Exact model	Confirm model nameplate or datasheet	Avoids mixing similar products or legacy SKUs
Operating duty	Confirm capacity, airflow, pressure or heat requirement as applicable	Keeps selection tied to the project condition
Installation	Confirm site restrictions, voltage/frequency and access	Reduces mismatch during procurement

Core Engineering Features

LHWS-2026A oil-fired heater selection snapshot set against the published values on this page. Every point below is taken from this model’s own data.

Use caseIndustrial warm-air heating projects that need an oil-fired heater configuration.

Selection factorConfirm heating capacity, fuel arrangement, power supply, site ventilation, safety clearance and target room size for quote review.

Buyer valueUse the original product data below as the starting point; final selection should be confirmed against the latest model datasheet or source-backed record.

Project fitUse this product when the project conditions match the product family and installation environment.

Procurement noteShare operating conditions so Linggongshare can confirm whether this model is suitable.

LHWS-2026AIndustrial Oil Fired Heater

Quality Assurance & Warranty

Heater orders are checked at the factory before shipping, because heating output and safety devices have to be verified unit by unit.

Applied to this model: Use case Industrial warm-air heating projects that need an oil-fired heater configuration., Selection factor Confirm heating capacity, fuel arrangement, power supply, site ventilation, safety clearance and target room size for quote review.. These checks are run against that specification before the unit ships.

Heat output and safety checkChecks cover element or burner start-up, overheat and safety cut-out response, airflow, fuel or electrical verification and model-to-table parameter matching.

Documented complianceCE and related files cover the listed heater families; see the documents section below.

Warranty supportWarranty for heater orders is confirmed with the quotation for your destination market.

Service parts for heatersHeating elements, thermostats, fuel nozzles and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on heating projects, the supply side adapts to your market instead of one fixed heater build.

For this model (Use case Industrial warm-air heating projects that need an oil-fired heater configuration., Selection factor Confirm heating capacity, fuel arrangement, power supply, site ventilation, safety clearance and target room size for quote review.), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for heater orders, including branded cartons and manual inserts.

Output and control variantsHeating capacity, fuel or electrical supply and control options are reviewed for your site.

Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.

Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.

Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Documents & Compliance

This heater series is supported by Linggong Electric CE EMC documentation covering LG-Y, LG-Q, HB/BH, LG-CDJ, LG-PTC, LG-D and LG-C heater model families.

CE EMC AttestationM.2024.206.C109286
Report No.HICFI101-EMC
ApplicantZhejiang Linggong Electric Appliance Co., Ltd.

Scope boundary: this is an EMC attestation for the listed heater model families; confirm exact model name and destination-market requirements before project documentation.

Frequently Asked Questions

Can Linggongshare recommend the exact model?

Yes. Send the application, site conditions and required duty point so the team can narrow the model range without guessing.

Are all values final for ordering?

Final selection should be confirmed against the latest exact-model datasheet or source-backed parameter record.

Product inquiry

Confirm the published specifications, then add this product to your quote list.

LHWS-2026A Industrial Oil-Fired Heater | Warm Air Heating