🎯 Trova il prodotto di ventilazione giusto
Chiedi alla nostra IA per HVAC — ottieni specifiche e consigli in pochi secondi
🔍
HT-DG360A1 Industrial Dehumidifier product image

HT-DG360A1 Industrial Dehumidifier | 360 L/D Moisture Control

360 industrial dehumidifier for moisture-control projects

CONTROLLO DELL'UMIDITÀ
360 industrial dehumidifier for moisture-control projects
CONTROLLO ALIMENTAZIONE
AC380V/50Hz; confermare il circuito esatto prima di ordinare
NOTA DI SELEZIONE
Confermare il carico del locale, l'umidità target e il piano di drenaggio prima del preventivo
Aggiungi al preventivo
Controllo dell'umidità industriale

HT-DG360A1 Industrial Dehumidifier | 360 L/D Large-Space Humidity Control

HT-DG360A1 is an industrial dehumidifier option for warehouses, production rooms, storage areas and equipment spaces where moisture control affects comfort, corrosion risk, product storage or process stability.

Capacità360 L/D
AlimentazioneAC380V/50Hz
Portata d'aria3000 m³/h
Fattori di selezione: A large-format unit: 360 L/D with 3,000 m³/h of circulation, on three-phase 380 V. Intended for big halls with a heavy moisture load.
Verifica di posizionamento: mantenere liberi i percorsi di ingresso e uscita dell'aria, pianificare il drenaggio dove necessario ed evitare posizioni in cui condensa o polvere possono bloccare il flusso d'aria.

Flusso di selezione

Flusso di progetto

1Carico di umiditàconfirm litres per day against 360 L/D with margin.
2Drenaggiothree-phase 380 V, circuit planned for 5,500 W.
3Circolazione dell'ariacontinuous drainage sized for a heavy condensate flow.
4Dettagli del progettoInviare quantità, destinazione e i documenti necessari per il tuo progetto.

Idoneità all'applicazione

Dove questo modello è adatto e cosa verificare per primo

Ideale perLarge production halls, big warehouses and spaces with a high, sustained moisture load.
Verificare primaThe daily load, the three-phase circuit for 5,500 W, air distribution and the drain.
EvitarePlacing it in a space too small for its airflow, or without the electrical capacity.
Nota per l'acquirenteAt 3,000 m³/h and 5,500 W this is a substantial unit, so both the room size and the electrical supply have to justify it.

Parametri tecnici supportati da fonti

Solo righe supportate da fonti: no missing/PDF-absent models are added. Medium-confidence rows keep confirmation notes.
HT-DG360A1 Industrial Dehumidifier | 360 L/D Moisture Control technical and selection table
Source model PIM/page model Dehumidification Voltage Input power Portata d'aria Size Confidence
HT-DG360A1 LG-DG360A1 360 AC380V/50Hz 5500 3000 1200x410x1600 high

Source notes:
HT-DG360A1 → LG-DG360A1: high confidence, source page uploaded_image_04; Source uses HT-DG360A1; mapped to existing LG-DG360A1 variant with mismatch note.

Legacy page note: Original page content was backed up before this source-backed UI v4 update.

Best-fit Applications

This model suits very large spaces: a full production hall, a big warehouse, or a facility where moisture loading is high and continuous. The 3,000 m³/h airflow is what carries dry air through a space of that size.

It draws 5,500 W on three-phase 380 V, so the electrical planning is a real part of the job, not an afterthought. At this capacity the drain also has to be continuous and reliable, because the unit will remove a large volume of water every day.

  • Large production halls: keeps conditions stable across a big working volume.
  • Big warehouses: protects stored goods where the load is high and constant.
  • High-load facilities: where smaller units would run non-stop and still miss target.

Selection guide

  • Moisture load: confirm litres per day against 360 L/D with margin.
  • Supply: three-phase 380 V, circuit planned for 5,500 W.
  • Air path: match the 3,000 m³/h circulation to a large space.
  • Drain route: continuous drainage sized for a heavy condensate flow.
  • Placement: allow clearance and access around a large cabinet.

What NOT to Buy

HT-DG360A1 Industrial Dehumidifier | 360 L/D Moisture Control technical and selection table
Situation Risk Better action
Space too small A 3,000 m³/h unit overwhelms a small room. Match capacity to volume and load.
Weak electrical supply 5,500 W needs a properly sized three-phase circuit. Confirm the supply before ordering.
Guessed load Oversizing or undersizing both cost money. Calculate litres per day first.
Tank drainage A unit this size needs continuous drainage. Plan the drain route.

Industrial Dehumidifier Buyer Checklist

Use the source-backed product information on this page as the starting point, then confirm site conditions before approving the final model.

  • Daily moisture load against 360 L/D
  • Three-phase 380 V circuit for 5,500 W
  • Air distribution across a large volume
  • Continuous drain sized for heavy flow
Selection note

HT-DG360A1 is positioned for large-space humidity control; confirm capacity, drainage and site humidity load before final selection.

Core Engineering Features

HT-DG360A1 Industrial Dehumidifier | 360 L/D Large-Space Humidity Cont set against the published values on this page. Every point below is taken from this model’s own data.

Capacità360 L/D
AlimentazioneAC380V/50Hz
Portata d'aria3000 m³/h
PIM/page modelLG-DG360A1
Dehumidification360
VoltageAC380V/50Hz

Quality Assurance & Warranty

Dehumidifier orders are verified at the factory before shipping, because a unit sized for a humidity target is only useful if it arrives working to that target.

Applied to this model: Capacity 360 L/D, Power AC380V/50Hz. These checks are run against that specification before the unit ships.

Unit-level humidity checkChecks cover compressor start, coil and drain integrity, airflow, humidity sensor response and model-to-table parameter matching.
Documented complianceCE LVD/EMC and RoHS files cover the listed HT, LG and HT-DG dehumidifier families; see the documents section below.
Warranty supportWarranty for dehumidifier orders is confirmed with the quotation for your destination market.
Service parts for dehumidifiersFilters, drain fittings, humidity controllers and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on moisture-control projects, the supply side adapts to your market instead of one fixed cabinet build.

For this model (Capacity 360 L/D, Power AC380V/50Hz), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for dehumidifier orders, including branded cartons and manual inserts.
Capacity and duty-point adjustmentHumidity control range, capacity class and drainage arrangement can be reviewed against your project.
Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.
Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.
Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Documenti & conformità

This dehumidifier series is supported by Linggong Electric CE LVD/EMC and RoHS documentation for the listed HT, LG, HT-DG, LG-DG and LG-D dehumidifier model ranges.

  • CE AttestationM.2025.206.C118876
  • Technical FilesDTCF0509-LVD/EMC and DTCF0509-ROHS
  • ApplicantZhejiang Linggong Electric Appliance Co., Ltd.

Scope boundary: use these documents for the dehumidifier model families listed in the certificates. The DTS1250 SGS performance report is not used here because its applicant/model scope does not match Linggongshare pages.

FAQ

How do I choose dehumidifier capacity?

Confirm the daily load against 360 L/D. This model suits a large hall or warehouse with a heavy load, and it needs three-phase power and continuous drainage, plus 3,000 m³/h of circulation space.

Can it run continuously?

Yes. At 5,500 W on three-phase 380 V with 3,000 m³/h, it is a continuous-duty unit, so size the circuit and the drain for round-the-clock running. Filter cleaning, a clear air path and a dependable drain are the routine items. On a large-format unit, plan service access and drain capacity before installation rather than after.

Why do some model names differ?

Some source rows use HT model codes while the website/PIM layer may use LG model codes. Both are shown to avoid silent normalization.

Download product catalog PDF

Download the English industrial dehumidifier catalog for product-family overview and technical review. Confirm the exact HT model, voltage and installation conditions with our team before relying on it for project selection.

Download catalog PDF

Use the exact model, voltage and installation conditions for project selection.

Product inquiry

Confirm the published specifications, then add this product to your quote list.