🎯 Trova il prodotto di ventilazione giusto
Chiedi alla nostra IA per HVAC — ottieni specifiche e consigli in pochi secondi
🔍
HT-15NE1 Industrial Dehumidifier product image

HT-15NE1 Industrial Dehumidifier | 10 kg/h Moisture Control

Deumidificatore industriale da 10kg/h per progetti di controllo dell'umidità

CONTROLLO DELL'UMIDITÀ
Deumidificatore industriale da 10kg/h per progetti di controllo dell'umidità
CONTROLLO ALIMENTAZIONE
AC380V/50Hz; confermare il circuito esatto prima di ordinare
NOTA DI SELEZIONE
Confermare il carico del locale, l'umidità target e il piano di drenaggio prima del preventivo
Aggiungi al preventivo
Controllo dell'umidità industriale

HT-15NE1 Constant Temperature Dehumidifier | Industrial Humidity Control

HT-15NE1 is an industrial dehumidifier option for warehouses, production rooms, storage areas and equipment spaces where moisture control affects comfort, corrosion risk, product storage or process stability.

Capacità10 kg/h
AlimentazioneAC380V/50Hz
Portata d'aria4800 m³/h
Fattori di selezione: A constant-temperature dehumidifier with higher airflow than the HT-15NE: 4,800 m³/h, for larger process or storage rooms where temperature must stay stable.
Verifica di posizionamento: mantenere liberi i percorsi di ingresso e uscita dell'aria, pianificare il drenaggio dove necessario ed evitare posizioni in cui condensa o polvere possono bloccare il flusso d'aria.

Flusso di selezione

Flusso di progetto

1Carico di umiditàconfirm both targets before selecting this type of unit.
2Drenaggioverificare il tasso di rimozione rispetto al carico del locale.
3Circolazione dell'ariatrifase 380 V, previsto per 3,7 kW.
4Dettagli del progettoInviare quantità, destinazione e i documenti necessari per il tuo progetto.

Idoneità all'applicazione

Dove questo modello è adatto e cosa verificare per primo

Ideale perLarger process rooms, labs and storage halls needing humidity control without a temperature drop.
Verificare primaBoth the humidity and temperature targets, plus the three-phase supply and drain.
EvitareChoosing it when a standard cooling dehumidifier would meet the need.
Nota per l'acquirenteThe higher-airflow constant-temperature model, so it covers a larger room than the HT-15NE while still holding temperature steady.

Technical Parameters

Righe pubblicate: I valori riportati di seguito sono le righe pubblicate del modello. Confermare la configurazione finale rispetto ai requisiti del progetto prima dell'approvazione dell'ordine.
HT-15NE1 Industrial Dehumidifier | 10 kg/h Moisture Control technical and selection table
ModelloDehumidificationVoltageInput powerPortata d'ariaSize
HT-15NE110 kg/hAC380V/50Hz3.7 kW4800800x600x1850

Conferma del progetto: Confermare il modello esatto, l'alimentazione elettrica, l'ambiente operativo, lo spazio di installazione e i documenti richiesti prima dell'approvazione finale dell'ordine.

Best-fit Applications

This model suits larger rooms where humidity must come down but temperature must stay put. With 4,800 m³/h of circulation it reaches further than the standard constant-temperature unit, which helps in a bigger process room, lab or storage hall.

It runs on three-phase 380 V, removes 10 kg/h, and keeps the room temperature stable as it works. Where a temperature drop would damage product or disrupt a process, this is the correct type of unit rather than a standard cooling dehumidifier.

  • Larger process rooms: controls humidity across a bigger space without shifting temperature.
  • Labs and clean areas: holds conditions stable where both humidity and temperature matter.
  • Storage halls: protects goods that react to damp and to temperature swings alike.

Selection guide

  • Umidità e temperatura: confirm both targets before selecting this type of unit.
  • Capacità in kg/h: verificare il tasso di rimozione rispetto al carico del locale.
  • Air distribution: use the 4,800 m³/h circulation in a larger room.
  • Supply: trifase 380 V, previsto per 3,7 kW.
  • Drain route: scarico continuo per lunghi periodi di funzionamento.

What NOT to Buy

HT-15NE1 Industrial Dehumidifier | 10 kg/h Moisture Control technical and selection table
Situation Risk Better action
Cooling needed This unit holds temperature rather than lowering it. Use a standard dehumidifier.
Small room 4,800 m³/h is more airflow than a small room needs. Consider the HT-15NE instead.
Sito monofase It requires three-phase 380 V. Confirm the supply first.
Undefined targets Without both targets the selection is guesswork. Set humidity and temperature first.

Industrial Dehumidifier Buyer Checklist

Use the source-backed product information on this page as the starting point, then confirm site conditions before approving the final model.

  • Humidity target and the temperature to be held
  • Tasso di rimozione rispetto a 10 kg/h
  • Circulation for 4,800 m³/h in a larger room
  • Three-phase 380 V, 3.7 kW, plus continuous drain
Selection note

HT-15NE1 is positioned for temperature-controlled industrial dehumidification; confirm capacity, drainage and site humidity load before final selection.

Core Engineering Features

HT-15NE1 Constant Temperature Dehumidifier | Industrial Humidity Contr set against the published values on this page. Every point below is taken from this model’s own data.

Capacità10 kg/h
AlimentazioneAC380V/50Hz
Portata d'aria4800 m³/h
Dehumidification10 kg/h
VoltageAC380V/50Hz
Input power3.7 kW

Quality Assurance & Warranty

Dehumidifier orders are verified at the factory before shipping, because a unit sized for a humidity target is only useful if it arrives working to that target.

Applied to this model: Capacity 10kg/h, Power AC380V/50Hz. These checks are run against that specification before the unit ships.

Unit-level humidity checkChecks cover compressor start, coil and drain integrity, airflow, humidity sensor response and model-to-table parameter matching.
Documented complianceCE LVD/EMC and RoHS files cover the listed HT, LG and HT-DG dehumidifier families; see the documents section below.
Warranty supportWarranty for dehumidifier orders is confirmed with the quotation for your destination market.
Service parts for dehumidifiersFilters, drain fittings, humidity controllers and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on moisture-control projects, the supply side adapts to your market instead of one fixed cabinet build.

For this model (Capacity 10kg/h, Power AC380V/50Hz), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for dehumidifier orders, including branded cartons and manual inserts.
Capacity and duty-point adjustmentHumidity control range, capacity class and drainage arrangement can be reviewed against your project.
Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.
Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.
Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Documenti & conformità

This dehumidifier series is supported by Linggong Electric CE LVD/EMC and RoHS documentation for the listed HT, LG, HT-DG, LG-DG and LG-D dehumidifier model ranges.

  • CE AttestationM.2025.206.C118876
  • Technical FilesDTCF0509-LVD/EMC and DTCF0509-ROHS
  • ApplicantZhejiang Linggong Electric Appliance Co., Ltd.

Scope boundary: use these documents for the dehumidifier model families listed in the certificates. The DTS1250 SGS performance report is not used here because its applicant/model scope does not match Linggongshare pages.

FAQ

How do I choose dehumidifier capacity?

Confirm both the humidity target and the temperature that must be held, then check the load against 10 kg/h. With 4,800 m³/h it suits a larger room than the HT-15NE.

Can it run continuously?

Yes, on three-phase 380 V. It holds room temperature while removing moisture, so it fits continuous duty in larger process and storage rooms where a temperature drop would spoil the work. Filter cleaning, a clear 4,800 m³/h air path and a free drain cover the routine work. Confirm service access for a tall cabinet, since a larger constant-temperature unit runs long hours.

Download product catalog PDF

Download the English product catalog PDF for HT-15NE1 Industrial Dehumidifier | 10 kg/h Moisture Control. Use it for model comparison, technical review and inquiry preparation.

Download catalog PDF

Use the exact model, voltage and installation conditions for project selection.

Product inquiry

Confirm the published specifications, then add this product to your quote list.