🎯 Trouvez le bon produit de ventilation
Demandez à notre IA CVC — obtenez des spécifications et une recommandation en quelques secondes
🔍
Hidden round duct vent white-background front view with central mesh opening and orange retaining clips
Hidden round duct vent white-background detail view with white circular body and orange retaining clip
Hidden round duct vent product details with adjustable panel, spring clip, mesh screen and brass insert
Hidden round duct vent installation sequence with duct insertion, screw fixing and paint-to-match finish
Traditional exposed vent compared with a seamless hidden round duct vent finish
Hidden round duct vent shown with paint, wallpaper and feature-wall finishes
Hidden round duct vent application concept for kitchen, bathroom and bedroom interiors
  1. Hidden round duct vent white-background front view with central mesh opening and orange retaining clips
  2. Hidden round duct vent white-background detail view with white circular body and orange retaining clip
  3. Hidden round duct vent product details with adjustable panel, spring clip, mesh screen and brass insert
  4. Hidden round duct vent installation sequence with duct insertion, screw fixing and paint-to-match finish
  5. Traditional exposed vent compared with a seamless hidden round duct vent finish
  6. Hidden round duct vent shown with paint, wallpaper and feature-wall finishes
  7. Hidden round duct vent application concept for kitchen, bathroom and bedroom interiors

Bouche de gaine ronde dissimulée | Sortie d'air dissimulée à peindre

A concealed round duct vent accessory for wall or ceiling finishes, with an adjustable panel, spring clips and mesh screening.

PRODUCT TYPE
Concealed round vent
VISIBLE FEATURES
Adjustable panel and mesh screen
CHECK FIRST
Ø75 / Ø100 size and finish requirement
Contrôle industriel de l'humidité
Concealed round outletØ75 / Ø100 optionsPaint-to-match finish

Hidden Round Duct Vent

For ducted ventilation layouts where the visible outlet should sit neatly within a wall or ceiling finish. The product uses an adjustable panel, spring-clip installation and mesh screening, with a finish that can be coordinated with the surrounding surface.

PRODUCT TYPE

Concealed round duct vent accessory

VISIBLE FEATURES

Adjustable panel, spring clips, brass insert and built-in mesh screen

ADÉQUATION AU PROJET

Duct diameter, opening size and finish requirement

Technical Parameters

Use the information below to define the accessory configuration. Values not listed here require confirmation for the selected configuration.

Hidden round duct vent configuration and selection table
Élément Published information Engineering check
Product type Concealed round duct vent accessory Confirm the selected model name in the quotation.
Visible features Adjustable panel, spring clips, brass insert and built-in mesh screen are shown. Confirm the selected configuration and material schedule.
Body material The product brief identifies ABS construction; confirm colour, finish and any project-specific material requirement. Confirm colour, finish and any project-specific material requirement.
Available nominal sizes Ø75 and Ø100 Match the nominal size to the planned duct connection and opening.
Airflow / pressure / electrical data Not listed in the product brief; confirm the paired ventilation equipment and duty. Confirm the paired ventilation equipment and duty.

Dimensions

Hidden round duct vent dimensions
Size A (mm) B (mm) C (mm)
Ø75 131 71 75
Ø100 148 75 94

Selection boundary: do not finalize the outlet size or duct compatibility until the selected configuration and project requirements have been checked.

Applications

Residential interiors

Suitable examples include kitchens, bathrooms and bedrooms; confirm the project finish and installation conditions.

Wall and ceiling finishes

Consider the concealed appearance where the outlet needs to coordinate with paint, wallpaper or a feature wall.

Ducted ventilation projects

Installation follows round-duct insertion, fixing and surface finishing; confirm the actual method and opening dimensions for the selected configuration.

Installation

Installation follows the workflow below; confirm the actual fixing method and opening dimensions for the selected configuration. Confirm the actual fixing method and opening dimensions for the selected configuration.

1

Compress the clips

Press the clips on both sides before insertion.

2

Insert into the duct

Place the round accessory into the duct opening.

3

Fix with screws

Secure the installed part after confirming the fixing method for the selected configuration.

4

Blend the finish

Paint and blend the surrounding area to match the wall finish.

Selection

Confirm the project dimensions before final configuration.

Duct and opening

Match Ø75 or Ø100 to the planned duct connection and opening size.

Surface finish

Confirm the wall or ceiling finish and the required paint-to-match treatment.

Paired equipment

Confirm the ventilation equipment and project duty when airflow or pressure requirements apply.

Core Engineering Features

Hidden Round Duct Vent set against the published values on this page. Every point below is taken from this model’s own data.

Published informationConcealed round duct vent accessory
Engineering checkConfirm the selected model name in the quotation.

Quality Assurance & Warranty

Fan orders are checked at the factory before shipping, because published airflow and pressure only hold if the delivered unit matches its table row.

Applied to this model: Published information Concealed round duct vent accessory, Engineering check Confirm the selected model name in the quotation.. These checks are run against that specification before the unit ships.

Airflow and pressure checkChecks cover motor start-up, impeller balance, airflow and static pressure verification, noise review and model-to-table parameter matching.
Documented complianceCE, RoHS and related files cover the listed fan families; see the documents section below.
Warranty supportWarranty for fan orders is confirmed with the quotation for your destination market.
Service parts for fansImpellers, motor capacitors, mounting brackets and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on ventilation projects, the supply side adapts to your market instead of one fixed fan build.

For this model (Published information Concealed round duct vent accessory, Engineering check Confirm the selected model name in the quotation.), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for fan orders, including branded cartons and manual inserts.
Airflow and pressure variantsModel selection, motor power and voltage options are reviewed against your duct calculation.
Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.
Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.
Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Documents & conformité

Download the hidden round duct vent datasheet (PDF) used for the technical values on this page.

Confirm the exact model and current documentation before quotation or project documentation.

View all certifications and compliance documents by product scope

FAQ

What is this hidden round vent used for?

It is a concealed round duct vent accessory for ventilation layouts where the outlet should coordinate with a wall or ceiling finish. The product is intended for concealed residential room applications; confirm the duct insertion and fixing details for the selected configuration.

Can the vent be painted to match the wall?

The finish can be painted and blended to match the surrounding surface; confirm the approved coating and preparation. Confirm the approved coating, surface preparation and finish colour for the selected configuration for final selection.

What information is needed for a quotation?

Send the duct diameter, opening size, installation surface, preferred finish, paired ventilation equipment and project quantity. The exact configuration can then be reviewed.

Are airflow and electrical values published?

No airflow, pressure or electrical values were supplied with this product brief. Confirm the paired ventilation equipment and selected configuration when those values are required for the project.

Product inquiry

Confirm the published specifications, then add this product to your quote list.

ADD TO QUOTE