Ceiling Dehumidifier

Aperçu de la sélection

Ceiling Dehumidifier fits projects that need ceiling-mounted moisture control without taking floor space. Use the checks below to confirm capacity, room volume, drainage and service access for quote review.

Model Specification

Values are transcribed from the cited catalogue page. Confirm project voltage, installation conditions and the exact model before ordering.

Modèle	Dehumidification	Airflow	Refrigerant	Applicable area	Drain system	Weight	Size (mm)
LG-D26DA	26 L/day	420 m³/h	R410A / 250 g	100 m²	Drain pipe	18 kg	650 × 350 × 250
LG-D138DA	138 L/day	240 m³/h	R410A / 450 g	150–200 m²	Drain pipe	55 kg	705 × 475 × 300
LG-D168DA	168 L/day	1600 m³/h	R410A / 250 g	200–300 m²	Drain pipe	90 kg	600 × 705 × 1040
LG-D360DA	360 L/day	3000 m³/h	R410A / 1600 g × 2	500–800 m²	Drain pipe	110 kg	805 × 700 × 1100
LG-D480DA	480 L/day	4200 m³/h	R410A / 1900 g × 3	800–1000 m²	Drain pipe	150 kg	805 × 700 × 1100

Source: CHIC HVAC 2026 Catalogue, p. 58–59.

Politique de performance et de spécifications

Ceiling Dehumidifier technical and selection table
Élément	Facteurs de sélection	Pourquoi c'est important
Exact model	Confirm by model nameplate or datasheet	Avoids mixing similar series or legacy SKUs
Airflow / capacity	Confirm required duty point for quote review	Keeps selection tied to the project condition
Installation	Confirm mounting method, voltage/frequency and site restrictions	Reduces mismatch during procurement

Typical Applications

Project fit

Industrial moisture control.

Spec reference

Numeric parameters should be finalized only from source-backed records or the latest datasheet.

Facteurs de sélection

Share room size, target humidity and installation location.
Confirm model, voltage/frequency, drainage route and ceiling service access.
Flag any certificate, drawing or special material requirement for quote review.

Compare the options

Compare this product by exact model, duty point, installation method, site environment, support documents and after-sales requirements, not by title alone.

Core Engineering Features

Selection Snapshot set against the published values on this page. Every point below is taken from this model’s own data.

Project fitIndustrial moisture control.

Spec referenceNumeric parameters should be finalized only from source-backed records or the latest datasheet.

Dehumidification26 L/day

Airflow420 m³/h

RefrigerantR410A / 250 g

Applicable area100 m²

Quality Assurance & Warranty

Dehumidifier orders are verified at the factory before shipping, because a unit sized for a humidity target is only useful if it arrives working to that target.

Applied to this model: Project fit Industrial moisture control., Spec reference Numeric parameters should be finalized only from source-backed records or the latest datasheet.. These checks are run against that specification before the unit ships.

Unit-level humidity checkChecks cover compressor start, coil and drain integrity, airflow, humidity sensor response and model-to-table parameter matching.

Documented complianceCE LVD/EMC and RoHS files cover the listed HT, LG and HT-DG dehumidifier families; see the documents section below.

Warranty supportWarranty for dehumidifier orders is confirmed with the quotation for your destination market.

Service parts for dehumidifiersFilters, drain fittings, humidity controllers and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on moisture-control projects, the supply side adapts to your market instead of one fixed cabinet build.

For this model (Project fit Industrial moisture control., Spec reference Numeric parameters should be finalized only from source-backed records or the latest datasheet.), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for dehumidifier orders, including branded cartons and manual inserts.

Capacity and duty-point adjustmentHumidity control range, capacity class and drainage arrangement can be reviewed against your project.

Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.

Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.

Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Documents & conformité

This dehumidifier series is supported by Linggong Electric CE LVD/EMC and RoHS documentation for the listed HT, LG, HT-DG, LG-DG and LG-D dehumidifier model ranges.

CE AttestationM.2025.206.C118876
Technical FilesDTCF0509-LVD/EMC and DTCF0509-ROHS
ApplicantZhejiang Linggong Electric Appliance Co., Ltd.

Scope boundary: use these documents for the dehumidifier model families listed in the certificates. The DTS1250 SGS performance report is not used here because its applicant/model scope does not match Linggongshare pages.

View all certifications and compliance documents by product scope

Frequently Asked Questions

Can Linggongshare recommend a model directly?

Yes. Send the application, airflow or capacity target, installation constraints and power supply. The team can help narrow the model range.

Are all technical values final on this page?

For safety, final selection should be confirmed against the latest exact-model datasheet or source-backed parameter record.

Product inquiry

Confirm the published specifications, then add this product to your quote list.