🎯 Trouvez le bon produit de ventilation
Demandez à notre IA CVC — obtenez des spécifications et une recommandation en quelques secondes
🔍
HT-15NE1 Industrial Dehumidifier product image

HT-15NE1 Industrial Dehumidifier | 10 kg/h Moisture Control

10kg/h industrial dehumidifier for moisture-control projects

CONTRÔLE DE L'HUMIDITÉ
10kg/h industrial dehumidifier for moisture-control projects
VÉRIFICATION DE L'ALIMENTATION
CA 380 V/50 Hz ; confirmer le circuit exact avant de commander
Confirmer la charge de la pièce, l'humidité cible et le plan de drainage avant devis
Ajouter au devis
Contrôle industriel de l'humidité
Déshumidificateur industriel HT-DG240A1 | Contrôle de l'humidité à haute capacité 240 L/j

HT-15NE1 Constant Temperature Dehumidifier | Industrial Humidity Control

HT-15NE1 is an industrial dehumidifier option for warehouses, production rooms, storage areas and equipment spaces where moisture control affects comfort, corrosion risk, product storage or process stability.

Capacity10kg/h
PowerAC380V/50Hz
Airflow4800 m³/h
Selection factors: A constant-temperature dehumidifier with higher airflow than the HT-15NE: 4,800 m³/h, for larger process or storage rooms where temperature must stay stable.
Placement check: keep air inlet and outlet paths clear, plan drainage where needed, and avoid positions where condensate or dust can block airflow.

Selection flow

Project flow

1Humidity loadconfirm both targets before selecting this type of unit.
2Drainagecheck the removal rate against the room load.
3Air circulationthree-phase 380 V, planned for 3.7 kW.
4Project detailsSend quantity, destination and the documents your project needs.

Application fit

Where this model fits, and what to verify first

Best fitLarger process rooms, labs and storage halls needing humidity control without a temperature drop.
Check firstBoth the humidity and temperature targets, plus the three-phase supply and drain.
AvoidChoosing it when a standard cooling dehumidifier would meet the need.
Buyer noteThe higher-airflow constant-temperature model, so it covers a larger room than the HT-15NE while still holding temperature steady.

Technical Parameters

Published rows: The values below are the published model rows. Confirm the final configuration against the project requirements before order approval.
HT-15NE1 Industrial Dehumidifier | 10 kg/h Moisture Control technical and selection table
ModèleDehumidificationVoltageInput powerAirflowSize
HT-15NE110kg/hAC380V/50Hz3.7 kW4800800x600x1850

Project confirmation: Confirm the exact model, electrical supply, operating environment, installation space and required documents before final order approval.

Best-fit Applications

This model suits larger rooms where humidity must come down but temperature must stay put. With 4,800 m³/h of circulation it reaches further than the standard constant-temperature unit, which helps in a bigger process room, lab or storage hall.

It runs on three-phase 380 V, removes 10 kg/h, and keeps the room temperature stable as it works. Where a temperature drop would damage product or disrupt a process, this is the correct type of unit rather than a standard cooling dehumidifier.

  • Larger process rooms: controls humidity across a bigger space without shifting temperature.
  • Labs and clean areas: holds conditions stable where both humidity and temperature matter.
  • Storage halls: protects goods that react to damp and to temperature swings alike.

Selection guide

  • Humidity and temperature: confirm both targets before selecting this type of unit.
  • Capacity in kg/h: check the removal rate against the room load.
  • Air distribution: use the 4,800 m³/h circulation in a larger room.
  • Supply: three-phase 380 V, planned for 3.7 kW.
  • Drain route: continuous drainage for long running periods.

What NOT to Buy

HT-15NE1 Industrial Dehumidifier | 10 kg/h Moisture Control technical and selection table
Situation Risk Better action
Cooling needed This unit holds temperature rather than lowering it. Use a standard dehumidifier.
Small room 4,800 m³/h is more airflow than a small room needs. Consider the HT-15NE instead.
Single-phase site It requires three-phase 380 V. Confirm the supply first.
Undefined targets Without both targets the selection is guesswork. Set humidity and temperature first.

Industrial Dehumidifier Buyer Checklist

Use the source-backed product information on this page as the starting point, then confirm site conditions before approving the final model.

  • Humidity target and the temperature to be held
  • Removal rate against 10 kg/h
  • Circulation for 4,800 m³/h in a larger room
  • Three-phase 380 V, 3.7 kW, plus continuous drain
Selection note

HT-15NE1 is positioned for temperature-controlled industrial dehumidification; confirm capacity, drainage and site humidity load before final selection.

Core Engineering Features

HT-15NE1 Constant Temperature Dehumidifier | Industrial Humidity Contr set against the published values on this page. Every point below is taken from this model’s own data.

Capacity10kg/h
PowerAC380V/50Hz
Airflow4800 m³/h
Dehumidification10kg/h
VoltageAC380V/50Hz
Input power3.7 kW

Quality Assurance & Warranty

Dehumidifier orders are verified at the factory before shipping, because a unit sized for a humidity target is only useful if it arrives working to that target.

Applied to this model: Capacity 10kg/h, Power AC380V/50Hz. These checks are run against that specification before the unit ships.

Unit-level humidity checkChecks cover compressor start, coil and drain integrity, airflow, humidity sensor response and model-to-table parameter matching.
Documented complianceCE LVD/EMC and RoHS files cover the listed HT, LG and HT-DG dehumidifier families; see the documents section below.
Warranty supportWarranty for dehumidifier orders is confirmed with the quotation for your destination market.
Service parts for dehumidifiersFilters, drain fittings, humidity controllers and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on moisture-control projects, the supply side adapts to your market instead of one fixed cabinet build.

For this model (Capacity 10kg/h, Power AC380V/50Hz), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for dehumidifier orders, including branded cartons and manual inserts.
Capacity and duty-point adjustmentHumidity control range, capacity class and drainage arrangement can be reviewed against your project.
Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.
Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.
Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Documents & conformité

This dehumidifier series is supported by Linggong Electric CE LVD/EMC and RoHS documentation for the listed HT, LG, HT-DG, LG-DG and LG-D dehumidifier model ranges.

  • CE AttestationM.2025.206.C118876
  • Technical FilesDTCF0509-LVD/EMC and DTCF0509-ROHS
  • ApplicantZhejiang Linggong Electric Appliance Co., Ltd.

Scope boundary: use these documents for the dehumidifier model families listed in the certificates. The DTS1250 SGS performance report is not used here because its applicant/model scope does not match Linggongshare pages.

FAQ

How do I choose dehumidifier capacity?

Confirm both the humidity target and the temperature that must be held, then check the load against 10 kg/h. With 4,800 m³/h it suits a larger room than the HT-15NE.

Can it run continuously?

Yes, on three-phase 380 V. It holds room temperature while removing moisture, so it fits continuous duty in larger process and storage rooms where a temperature drop would spoil the work. Filter cleaning, a clear 4,800 m³/h air path and a free drain cover the routine work. Confirm service access for a tall cabinet, since a larger constant-temperature unit runs long hours.

Download product catalog PDF

Download the English product catalog PDF for HT-15NE1 Industrial Dehumidifier | 10 kg/h Moisture Control. Use it for model comparison, technical review and inquiry preparation.

Download catalog PDF

Use the exact model, voltage and installation conditions for project selection.

Product inquiry

Confirm the published specifications, then add this product to your quote list.