🎯 Trova il prodotto di ventilazione giusto
Chiedi alla nostra IA per HVAC — ottieni specifiche e consigli in pochi secondi
🔍
LG-D15/D30 Industrial Electric Heater Fans product image

Aerotermi elettrici industriali LG-D15/D30 | Riscaldamento d'officina

Aerotermi elettrici industriali LG-D15/D30 per il riscaldamento elettrico intensivo in grandi spazi industriali

IDONEITÀ AL PROGETTO
Aerotermi elettrici industriali LG-D15/D30 per il riscaldamento elettrico intensivo in grandi spazi industriali
RANGE DI PRESTAZIONI
LG-D15/D30 · industrial heater · 380V · 15-30kW
Aggiungi al preventivo
Industrial Climate Control · Source-backed heater data

Industrial Electric Heater Selection Snapshot

Higher-power industrial electric heater fans for workshops, warehouses and large spaces requiring clean electric heat.

Exact model tableInquiry-ready CTADatasheet confirmation note
Product images are for installation/use context. Final heater selection should confirm the exact model datasheet, voltage, fuel/electric type, heating area and ventilation condition.

Technical Parameters

Aerotermi elettrici industriali LG-D15/D30 | Riscaldamento d'officina, tabella tecnica e di scelta
Modello Voltage / Frequency Rated Power Air Volume Product Size Packing Dimensions Net Weight Gross Weight Reference Area
LG-D15 380 V / 50 Hz 15000 W 1100 m³/h 495x520x860 mm 540x430x500 mm 17.7 kg 19.8 kg 180 m²
LG-D30 380 V / 50 Hz 30000 W 1911 m³/h 550x565x860 mm 600x480x560 mm 27 kg 29.5 kg 250 m²
Data source: Linggong product parameter supplement, pages listed in the table. Published rows should be confirmed against the exact model datasheet before final purchase/specification.

Applications & Buyer Fit

Typical spacesWorkshops, warehouses, construction interiors and production support areas with suitable 380 V supply.
Procurement valueQuick model comparison for workshops, warehouses, temporary work areas and small commercial rooms.
Safety noteKeep combustible materials away from hot air outlet and follow local electrical/fuel ventilation requirements.

Selection Guide

Confirm three-phase 380 V supply, circuit capacity and airflow direction before choosing between 15 kW and 30 kW units.

For electric heaters, confirm single/three-phase supply and wiring capacity. For oil/diesel heaters, confirm ventilation, fuel handling and whether indirect heating is required by the site.

Send us:

  • Heating area and ceiling height
  • Voltage/frequency available on site
  • Indoor/outdoor or temporary use
  • Required warm-up speed and duty cycle

Model Comparison Notes

LG-D15 is the 15 kW option with 1100 m³/h listed air volume; LG-D30 is the 30 kW option with 1911 m³/h listed air volume.

What Not to Buy

Do not choose by power only. Oversized heaters can create comfort and safety issues, while undersized units fail to warm the space. Do not use fuel-fired heaters in poorly ventilated enclosed areas without confirming local safety requirements.

Industrial Electric Heater Buyer Checklist

Use the source-backed table above as the starting point, then confirm site conditions before approving the final heater model.

  • Workshop area, ceiling height and insulation condition
  • Confirmed 380 V power supply and circuit capacity
  • Required airflow direction and safe clearance around the heater
  • Whether clean electric heat is preferred over fuel-fired heating
Fast model comparison

Choose LG-D15 for lower industrial heating load and LG-D30 for higher heat output and airflow; confirm electrical capacity before final selection.

Source-Backed Selection & Series Hub

This heater page keeps model-level parameters close to the Linggong source supplement. For cross-model comparison, use the Warm Air Blower & Heater Series hub before sending the inquiry.

Final confirmation required

Confirm exact datasheet, voltage/frequency, site ventilation, safety clearance, quantity and delivery requirement before final specification.

Core Engineering Features

Industrial Electric Heater Selection Snapshot set against the published values on this page. Every point below is taken from this model’s own data.

Voltage / Frequency380 V / 50 Hz
Rated Power15000 W
Air Volume1100 m³/h
Product Size495x520x860 mm
Packing Dimensions540x430x500 mm
Net Weight17.7 kg

Quality Assurance & Warranty

Heater orders are checked at the factory before shipping, because heating output and safety devices have to be verified unit by unit.

Applied to this model: Voltage / Frequency 380 V / 50 Hz, Rated Power 15000 W. These checks are run against that specification before the unit ships.

Heat output and safety checkChecks cover element or burner start-up, overheat and safety cut-out response, airflow, fuel or electrical verification and model-to-table parameter matching.
Documented complianceCE and related files cover the listed heater families; see the documents section below.
Warranty supportWarranty for heater orders is confirmed with the quotation for your destination market.
Service parts for heatersHeating elements, thermostats, fuel nozzles and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on heating projects, the supply side adapts to your market instead of one fixed heater build.

For this model (Voltage / Frequency 380 V / 50 Hz, Rated Power 15000 W), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for heater orders, including branded cartons and manual inserts.
Output and control variantsHeating capacity, fuel or electrical supply and control options are reviewed for your site.
Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.
Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.
Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Documenti & conformità

This heater series is supported by Linggong Electric CE EMC documentation covering LG-Y, LG-Q, HB/BH, LG-CDJ, LG-PTC, LG-D and LG-C heater model families.

  • CE EMC AttestationM.2024.206.C109286
  • Report No.HICFI101-EMC
  • ApplicantZhejiang Linggong Electric Appliance Co., Ltd.

Scope boundary: this is an EMC attestation for the listed heater model families; confirm exact model name and destination-market requirements before project documentation.

FAQ

Can these heater models be used as final engineering specifications?

Use this table as a source-backed product page reference. Final ordering should confirm the exact model datasheet and site conditions.

Which model should I choose?

Share the area, ceiling height, insulation, voltage and whether fuel-fired heating is acceptable. We can help narrow the model for quote review.

Download product catalog PDF

Download the English product catalog PDF for Aerotermi elettrici industriali LG-D15/D30 | Riscaldamento d'officina. Use it for model comparison, technical review and inquiry preparation.

Download catalog PDF

Use the exact model, voltage and installation conditions for project selection.

Product inquiry

Confirm the published specifications, then add this product to your quote list.