🎯 Trova il prodotto di ventilazione giusto
Chiedi alla nostra IA per HVAC — ottieni specifiche e consigli in pochi secondi

LG-Y20/Y30/Y50 Diesel Heater Series | Industrial Heating

LG-Y20/Y30/Y50 Diesel Heater Series for industrial diesel-powered heating in remote and off-grid locations

IDONEITÀ AL PROGETTO
LG-Y20/Y30/Y50 Diesel Heater Series for industrial diesel-powered heating in remote and off-grid locations
RANGE DI PRESTAZIONI
LG-Y20/Y30/Y50 · diesel heater · 220V · 20-50kW
Industrial Climate Control · Source-backed heater data

Oil-Fired Heater Selection Snapshot

Portable industrial oil/diesel heater series for temporary and large-area heating, with source-backed power, tank and fuel consumption rows.

Exact model tableInquiry-ready CTADatasheet confirmation note
Product images are for installation/use context. Final heater selection should confirm the exact model datasheet, voltage, fuel/electric type, heating area and ventilation condition.

Technical Parameters

LG-Y20/Y30/Y50 Diesel Heater Series | Industrial Heating technical and selection table
Modello Voltage / Frequency Rated Power Air Volume Product Size Packing Dimensions Net Weight Gross Weight Tank Size Oil Consumption
LG-Y20 220 V / 50 Hz 20 kW 720 m³/h 400x800x560 mm 810x310x385 mm 18 kg 21 kg 20 L 1.5-2.4 kg/h
LG-Y30 220 V / 50 Hz 30 kW 720 m³/h 840x640x470 mm 850x390x470 mm 20.3 kg 23.8 kg 38 L 1.5-2.4 kg/h
LG-Y50 220 V / 50 Hz 50 kW 1100 m³/h 990x740x515 mm 1000x420x530 mm 27.4 kg 30.5 kg 56 L 2.0-4.0 kg/h
LG-Y70 220 V / 50 Hz 70 kW 1300 m³/h 1230x580x735 mm 1130x480x650 mm 40 kg 43.5 kg 68 L 2.5-5.4 kg/h
LG-Y100 220 V / 50 Hz 100 kW 1300 m³/h 1230x580x735 mm 1130x480x650 mm 40 kg 43.5 kg 68 L 4.0-8.0 kg/h
LG-Y120 220 V / 50 Hz 120 kW 2800 m³/h 1470x690x830 mm 1360x580x750 mm 58 kg 65 kg 100 L 8.0-10.0 kg/h
LG-Y135 220 V / 50 Hz 135 kW 3200 m³/h 1410x700x960 mm 1370x590x900 mm 63 kg 85 kg 100 L 8.0-10.8 kg/h
LG-Y150 220 V / 50 Hz 150 kW 4600 m³/h 1650x690x1125 mm 1620x650x1220 mm 92 kg 128 kg 100 L 8.0-11.7 kg/h
Data source: Linggong product parameter supplement, pages listed in the table. Published rows should be confirmed against the exact model datasheet before final purchase/specification.

Applications & Buyer Fit

Typical spacesWorkshops, warehouses, job sites, temporary structures and large service areas where fuel-fired heating is acceptable.
Procurement valueQuick model comparison for workshops, warehouses, temporary work areas and small commercial rooms.
Safety noteKeep combustible materials away from hot air outlet and follow local electrical/fuel ventilation requirements.

Selection Guide

Select by heating load, ventilation and fuel logistics. Confirm tank size, oil consumption and safe exhaust/airflow arrangement before deployment.

For electric heaters, confirm single/three-phase supply and wiring capacity. For oil/diesel heaters, confirm ventilation, fuel handling and whether indirect heating is required by the site.

Send us:

  • Heating area and ceiling height
  • Voltage/frequency available on site
  • Indoor/outdoor or temporary use
  • Required warm-up speed and duty cycle

Model Comparison Notes

LG-Y20/Y30 are lower-power portable units; LG-Y50 steps up to 50 kW; LG-Y70/Y100 share the larger body format in the source table.

What Not to Buy

Do not choose by power only. Oversized heaters can create comfort and safety issues, while undersized units fail to warm the space. Do not use fuel-fired heaters in poorly ventilated enclosed areas without confirming local safety requirements.

Diesel / Oil-Fired Heater Buyer Checklist

Use the source-backed table above as the starting point, then confirm site conditions before approving the final heater model.

  • Heating area, ceiling height and expected temperature rise
  • Ventilation condition and fuel handling requirements
  • Tank size, oil consumption range and operating duration
  • Whether electric heater or fuel-fired heater is safer for the site
Fast model comparison

LG-Y20/Y30 are lower-power portable options; LG-Y50 steps up output; LG-Y70/Y100 share the larger body format in the source table.

Source-Backed Selection & Series Hub

This heater page keeps model-level parameters close to the Linggong source supplement. For cross-model comparison, use the Warm Air Blower & Heater Series hub before sending the inquiry.

Final confirmation required

Confirm exact datasheet, voltage/frequency, site ventilation, safety clearance, quantity and delivery requirement before final specification.

Core Engineering Features

Oil-Fired Heater Selection Snapshot set against the published values on this page. Every point below is taken from this model’s own data.

Voltage / Frequency220 V / 50 Hz
Rated Power20 kW
Air Volume720 m³/h
Product Size400x800x560 mm
Packing Dimensions810x310x385 mm
Net Weight18 kg

Quality Assurance & Warranty

Heater orders are checked at the factory before shipping, because heating output and safety devices have to be verified unit by unit.

Applied to this model: Voltage / Frequency 220 V / 50 Hz, Rated Power 20 kW. These checks are run against that specification before the unit ships.

Heat output and safety checkChecks cover element or burner start-up, overheat and safety cut-out response, airflow, fuel or electrical verification and model-to-table parameter matching.
Documented complianceCE and related files cover the listed heater families; see the documents section below.
Warranty supportWarranty for heater orders is confirmed with the quotation for your destination market.
Service parts for heatersHeating elements, thermostats, fuel nozzles and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on heating projects, the supply side adapts to your market instead of one fixed heater build.

For this model (Voltage / Frequency 220 V / 50 Hz, Rated Power 20 kW), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for heater orders, including branded cartons and manual inserts.
Output and control variantsHeating capacity, fuel or electrical supply and control options are reviewed for your site.
Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.
Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.
Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Documenti & conformità

This heater series is supported by Linggong Electric CE EMC documentation covering LG-Y, LG-Q, HB/BH, LG-CDJ, LG-PTC, LG-D and LG-C heater model families.

  • CE EMC AttestationM.2024.206.C109286
  • Report No.HICFI101-EMC
  • ApplicantZhejiang Linggong Electric Appliance Co., Ltd.

Scope boundary: this is an EMC attestation for the listed heater model families; confirm exact model name and destination-market requirements before project documentation.

FAQ

Can these heater models be used as final engineering specifications?

Use this table as a source-backed product page reference. Final ordering should confirm the exact model datasheet and site conditions.

Which model should I choose?

Share the area, ceiling height, insulation, voltage and whether fuel-fired heating is acceptable. We can help narrow the model for quote review.

Download product catalog PDF

Download the English product catalog PDF for LG-Y20/Y30/Y50 Diesel Heater Series | Industrial Heating. Use it for model comparison, technical review and inquiry preparation.

Use the exact model, voltage and installation conditions for project selection.

Product inquiry

Confirm the published specifications, then add this product to your quote list.