Ceiling Exhaust Fan BPT Series | Contact for Price & Specs

Exhaust fan selection

Ceiling Exhaust Fan Selection Snapshot

Use this model when the buyer needs a small-room ceiling exhaust point and wants to avoid wrong opening size, weak airflow or unnecessary installation rework.

Project fitsmall-room ceiling exhaust

Applicationbathroom, washroom and small-room exhaust

Decision valuehelps screen fit quickly before deeper quote comparison

Selection rule

Use this model to reduce wrong-size and wrong-route risk for product selection. Confirm opening size, duct route, airflow/noise target and power supply before final order.

Product parameters

Ceiling Exhaust Fan Specifications

Reference dimensions and performance data for the BPT10-23 / BPT-10-23 ceiling exhaust fan model.

BPT10-23 ceiling exhaust fan size drawing showing A B C ΦD D and E dimensions — Use the size drawing together with the vertical dimension card to check panel size, duct diameter and installation depth for quote review.

BPT10-23 dimensions

Modèle: BPT10-23
A: 300 mm
B: 300 mm
C: 100 mm
ΦD: 98 mm
D: 363 mm
E: 237 mm

For buyers, this means a 300 × 300 mm visible panel, a 300 × 300 mm opening reference and about 100 mm class duct connection planning.

Size note: A/B are panel width and height; ΦD is duct diameter; C/D/E support side-view installation depth checks.

Performance
Modèle	Voltage(V)	Power(W)	Airflow(m³/h)	Static Pressure(Pa)	Noise(dB)	G.W (kg)	Hole Size (mm)	Panel Size (mm)	Dimension du conduit (mm)	Carton/Pièce
BPT10-20-12SL	220	30	120	65	42	1.4	200*200	245*245	100	8
BPT10-23-155L	220	40	150	65	42	1.4	230*230	270*270	100	8
BPT10-25-175L	220	40	170	95	41	1.7	250*250	304*304	100	8
BPT10-28-215L	220	34	210	165	43	1.8	280*280	320*320	100	8
BPT10-30-30SL	220	45	300	200	45	2.1	300*300	335*335	100	8
BPT10-34-40SL	220	45	400	205	46	2.2	340*340	400*400	100	4
BPT15-34-50SL	220	50	500	210	47	2.2	340*340	400*400	150	4

Ceiling Exhaust Fan model dimensions
Modèle	A	B	C	D	φE
BPT10-20-12SL	200	209	240	30	100
BPT10-23-155L	230	238	270	30	100
BPT10-25-175L	250	275	310	30	100
BPT10-28-215L	275	279	320	30	95
BPT10-30-30SL	300	301	340	30	100
BPT10-34-40SL	340	343	400	30	100
BPT15-34-50SL	340	340	400	30	150

Buyer fit

Who this BPT-10-23 ceiling exhaust fan fits

Installer / contractor

Use this model when the project needs a 300 × 300 mm ceiling panel, 300 × 300 mm opening and 100 mm duct connection. The compact 2.1 kg unit is suitable for small-room ceiling exhaust points where installation space is limited.

Distributor / reseller

Position BPT-10-23 as a compact ceiling-mounted exhaust fan for bathrooms, washrooms and small rooms. Key quote facts are 200V~50Hz, 30 W, 180 m³/h airflow, 98 Pa static pressure and 42 dB(A) noise.

Property / project buyer

Choose this page when the requirement is a simple overhead exhaust point rather than a large duct fan. Confirm whether 180 m³/h airflow and 42 dB(A) noise meet the room target for final selection.

Not the right fit

Do not use this model as a replacement for high-airflow duct systems or long duct runs without checking resistance. If the project needs higher airflow, larger duct size or lower noise, compare other exhaust fan models first.

Demand fit

What need does this model help solve

For quiet small-room exhaust

Use this model when the buyer needs a simple ceiling exhaust point for bathrooms, washrooms or small rooms without moving to a larger duct fan solution.

What worry it reduces

The 300 × 300 panel, 100 mm duct and 180 m³/h airflow help screen opening-size mismatch and underpowered small-room exhaust for final selection.

When to compare other models

If the project needs longer duct runs, higher airflow, lower noise or larger duct size, compare other exhaust fan models before approving this one.

Next safe step

Send opening size, duct route, voltage and quantity when the buyer wants faster quote confirmation with lower rework risk.

Selection guide

1. Define room need

Bathroom, utility room, commercial restroom, workshop or sidewall exhaust.

2. Confirm air route

Ceiling duct, direct wall route, shutter opening or panel installation.

3. Match performance

Confirm airflow, noise target, duct length and bends.

4. Request confirmation

Send model, quantity, voltage and destination for selection support.

Fit check

Compare the options

Use the official Exhaust Fans Collection Hub when comparing ceiling, wall, EC bathroom and shutter exhaust fan options.

Core Engineering Features

Ceiling Exhaust Fan Selection Snapshot set against the published values on this page. Every point below is taken from this model’s own data.

Project fitsmall-room ceiling exhaust

Applicationbathroom, washroom and small-room exhaust

Decision valuehelps screen fit quickly before deeper quote comparison

Voltage(V)220

Power(W)30

Airflow(m³/h)120

Quality Assurance & Warranty

Fan orders are checked at the factory before shipping, because published airflow and pressure only hold if the delivered unit matches its table row.

Applied to this model: Project fit small-room ceiling exhaust, Application bathroom, washroom and small-room exhaust. These checks are run against that specification before the unit ships.

Airflow and pressure checkChecks cover motor start-up, impeller balance, airflow and static pressure verification, noise review and model-to-table parameter matching.

Documented complianceCE, RoHS and related files cover the listed fan families; see the documents section below.

Warranty supportWarranty for fan orders is confirmed with the quotation for your destination market.

Service parts for fansImpellers, motor capacitors, mounting brackets and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on ventilation projects, the supply side adapts to your market instead of one fixed fan build.

For this model (Project fit small-room ceiling exhaust, Application bathroom, washroom and small-room exhaust), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for fan orders, including branded cartons and manual inserts.

Airflow and pressure variantsModel selection, motor power and voltage options are reviewed against your duct calculation.

Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.

Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.

Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Documents & conformité

Download the metal exhaust fan datasheet used for the technical values on this page, and review the relevant compliance documents.

Download metal exhaust fan datasheet (PDF)

Confirm the exact model, destination-market requirements and current documentation before quotation or project documentation.

View all certifications and compliance documents by product scope

Frequently asked questions

How do I choose this model?

Start from the installation route and room use, then confirm the exact model datasheet or database row.

Can I use generic fan values?

No. Use only confirmed source values for airflow, noise, power and dimensions.

What should I send for quotation?

Send room type, opening size, duct path, airflow target, voltage, quantity and destination.

Product inquiry

Confirm the published specifications, then add this product to your quote list.

Ceiling Exhaust Fan

Ceiling Exhaust Fan Selection Snapshot