🎯 Das passende Lüftungsprodukt finden
Fragen Sie unsere HLK-KI — erhalten Sie Spezifikationen & Empfehlung in Sekunden

Einzelraum-WRG VT501-WiFi

VT501 / VT501-WF / VT501-MS for single-room fresh-air ventilation with heat recovery and optional smart control

Luftvolumenstrom20–60 m³/h · 4 stages
Wall / Tube250–500 mm
Voltage12VDC or 100–240V
ControlWIFI / Remote
PROJEKTEIGNUNG
Compact wall-install · operating modes Sleep / I / II / III

▶

Why VT501-WiFi for single-room fresh air

95% Recovery

Ceramic heat exchanger

Recovers up to 95% of thermal energy, so fresh air arrives without throwing away conditioned air.

Smart Control

Remote or WiFi operation

Choose the standard remote model or the WiFi model with Tuya app control, CO2 monitoring and automation.

Dual Filter

HEPA + activated carbon

Multi-stage filtration reduces pollen, dust, PM and outdoor odors before supply air enters the room.

Quiet Room

Under 30 dB operation

A brushless DC motor and sound-sealed design suit bedrooms, nurseries and home offices.

3 Modes

Fresh, exhaust and cycle

Fresh Air, Exhaust and 65-second Cycle modes give practical control over room ventilation.

DIY Fit

Single-hole wall install

No central ductwork required. It installs through an exterior wall with a telescopic duct and room-side panel.

Source-backed VT501-WiFi HRV parameters

Veröffentlichte Quelle: KCVENTS VT501 technical table.

Parameter Sleep I II III
Installation tube / wall thickness 250–500 mm
Voltage 12VDC or 100–240V 50–60Hz
Ventilator Total Power (W) 2.5 3.0 4.5 8.5
Ventilator Current (A) 0.025 0.030 0.045 0.070
Luftstrom (m³/h) 20 48 54 60
Speed (RPM) 630 1100 1600 2200
Noise Level (dB(A)) 12 20.0 24.0 30.0
Transported Air Temperature -20°C (-4°F) to +50°C (122°F)
Heat Exchange Efficiency up to 95%
Heat Exchanger Core Ceramic

How to select the right VT501 version

VT501 comes in three control versions for single-room fresh-air ventilation with heat recovery: VT501 (base), VT501-WF (WiFi) and VT501-MS.

Pick the airflow stage

Four stages (20 / 48 / 54 / 60 m³/h) suit bedrooms, offices and small rooms. Match the stage to room size and occupancy.

Check wall / tube depth

The installation tube fits 250–500 mm wall thickness. Measure the actual opening before ordering.

Choose the control

Base remote control or WiFi version with app control. Confirm which is required for the project.

Where this single-room HRV fits

VT501 / VT501-WF / VT501-MS is a room-by-room ventilation route for bedrooms, offices and other spaces where a central ventilation system is not the selected installation approach.

Fit boundary: For whole-building balanced ventilation, confirm whether a central ERV or multi-room design is required.

Häufig gestellte Fragen

Can this replace a central ERV?

It is mainly a room-by-room retrofit option. For whole-building balanced ventilation, confirm a central ERV or multi-room design.

What must be checked before order?

See the order checklist above: control version, wall thickness, airflow stage, power supply and quantity.

Are the listed values final for every version?

No. The values are source-backed from PDF p.6; confirm the exact version and order configuration for quote review.

Certification & quality assurance

100% pre-shipment inspection

Every batch undergoes functional and dimensional checks so that every unit arrives ready for installation: ceramic core fit, filter placement, remote and WiFi response, airflow mode switching, wall tube sizing and noise verification.

Hardware warranty support

In the rare event of a material defect or mechanical failure under standard operation, a straightforward replacement service protects your project timeline.

Before you order: confirm checklist

  • Control version: VT501 (remote) or VT501-WF (WiFi)
  • Wall thickness and installation tube length (250–500 mm)
  • Airflow stage (Sleep / I / II / III) and operating mode
  • Power supply and quantity

Zentrale Konstruktionsmerkmale

Why VT501-WiFi for single-room fresh air set against the published values on this page. Every point below is taken from this model’s own data.

Pick the airflow stageFour stages (20 / 48 / 54 / 60 m³/h) suit bedrooms, offices and small rooms. Match the stage to room size and occupancy.
Check wall / tube depthThe installation tube fits 250–500 mm wall thickness. Measure the actual opening before ordering.
Choose the controlBase remote control or WiFi version with app control. Confirm which is required for the project.
Installation tube / wall thickness250–500 mm

Qualitätssicherung & Garantie

Ventilatorbestellungen werden vor dem Versand im Werk geprüft, denn veröffentlichter Luftstrom und Druck gelten nur, wenn das gelieferte Gerät seiner Tabellenzeile entspricht.

Applied to this model: Pick the airflow stage Four stages (20 / 48 / 54 / 60 m³/h) suit bedrooms, offices and small rooms. Match the stage to room size and occupancy., Check wall / tube depth The installation tube fits 250–500 mm wall thickness. Measure the actual opening before ordering.. These checks are run against that specification before the unit ships.

Prüfung von Luftstrom und DruckDie Prüfungen umfassen Motoranlauf, Laufradauswuchtung, Luftstrom- und statische Druckprüfung, Lärmbewertung und Abgleich der Parameter Modell zu Tabelle.
Documented complianceCE-, RoHS- und zugehörige Dateien decken die aufgeführten Ventilatorfamilien ab; siehe den Dokumentenbereich unten.
Warranty supportDie Garantie für Ventilatorbestellungen wird mit dem Angebot für Ihren Zielmarkt bestätigt.
Service parts for fansLaufräder, Motorkondensatoren, Montagewinkel und gängige Verschleißteile.

OEM/ODM & Supply Options

Für Distributoren und Auftragnehmer in Lüftungsprojekten passt sich die Lieferseite Ihrem Markt an statt einer festen Ventilatorkonstruktion.

For this model (Pick the airflow stage Four stages (20 / 48 / 54 / 60 m³/h) suit bedrooms, offices and small rooms. Match the stage to room size and occupancy., Check wall / tube depth The installation tube fits 250–500 mm wall thickness. Measure the actual opening before ordering.), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging-, Verpackungs- und Steuerungsoptionen für Ventilatorbestellungen, einschließlich gebrandeter Kartons und Handbuchbeilagen.
Luftstrom- und DruckvariantenModellauswahl, Motorleistung und Spannungsoptionen werden gegen Ihre Kanalberechnung geprüft.
Voltage & plug optionsSpannung und Steckerkonfiguration für diese Produktlinie können im Angebot geprüft werden.
Dokumentation & GroßhandelsversorgungKataloge, technische Datenblätter, verfügbare Zertifikate, Mengenpreise und Händlerprogramme für diese Produktlinie.
Bestellmenge & VorlaufzeitMindestbestellmenge, Musterstellung und Produktionsvorlaufzeit werden je Modell und Bestellvolumen bestätigt — siehe die B2B supply page zur Bearbeitung von Beschaffungsanfragen.

Product inquiry

Have your control version, wall thickness, airflow stage and quantity ready, then add this product to your quote list.

Download the VT501 catalog







control-mode

,