Wärmerückgewinnungsventilator VT125
VT125 / VT125-WF for single-room fresh-air renovation where 125-class wall installation is required
- PROJEKTEIGNUNG
- VT125 / VT125-WF for single-room fresh-air renovation where 125-class wall installation is required
- SOURCE NOTE
- Key values from CHIC GROUP HVAC 2026 PDF p.7; confirm exact version
- QUOTE CHECKLIST
- Confirm wall opening, tube length, airflow step, speed mode, power supply and room use
Heat Recovery Ventilation Selection Snapshot
Heat Recovery Ventilator VT125 is positioned for single-room fresh-air renovation where 125-class wall installation is required. The visible technical values below are tied to CHIC GROUP HVAC 2026 PDF page 7 OCR source and should be confirmed against the exact order version for quote review.
Do not select a wall-mounted HRV by model name only. Confirm wall thickness, tube length, airflow step, control version and power supply for product selection.
Key specification checks
| Spec item | Source value | Buyer check |
|---|---|---|
| Voltage | 12VDC or 100–240V 50–60Hz | confirm version before order |
| Total power | 2.5 / 6.0 / 8.5 / 12 W by speed | Confirm the exact speed mode and version before order. |
| Luftvolumenstrom | 20 / 30 / 45 / 60 m³/h | sleep to high speed modes |
| Speed | 630 / 1200 / 2050 / 2900 RPM | depends on selected speed |
| Heat exchange efficiency | up to 90% | ceramic core, source page statement |
| Temperature range | -20°C to +50°C | transported air temperature |
Where this single-room HRV fits
This product is designed for single-room fresh-air ventilation with ceramic heat recovery. It is suitable when central ducted ERV installation is not practical or when a room-by-room retrofit is preferred.
Selection depends on room size, wall structure, airflow target, noise expectation and control preference.
- Room type and approximate area
- Wall thickness and available drilling diameter
- Required airflow step / noise expectation
- Control version: standard, WiFi or MS if applicable
- Spannung/Frequenz und Stückzahl
HRV selection guide
Bedroom, apartment room, office, classroom or retrofit space.
Confirm installation tube length, wall thickness and outside grille position.
Use source-backed airflow steps and consider noise in occupied areas.
Choose standard, WiFi or MS version for quote review.
Compare VT single-room HRV models
Use VT100, VT125 and VT501 ranges by wall opening, airflow requirement, control version and room size. For accessories such as fresh-air valve or HEPA/carbon filter, use the HRV/accessory source pages from the same PDF before final page updates.
Zentrale Konstruktionsmerkmale
Heat Recovery Ventilation Selection Snapshot set against the published values on this page. Every point below is taken from this model’s own data.
Qualitätssicherung & Garantie
Ventilatorbestellungen werden vor dem Versand im Werk geprüft, denn veröffentlichter Luftstrom und Druck gelten nur, wenn das gelieferte Gerät seiner Tabellenzeile entspricht.
Applied to this model: Project fit VT125 / VT125-WF, Application single-room fresh-air renovation where 125-class wall installation is required. These checks are run against that specification before the unit ships.
OEM/ODM & Supply Options
Für Distributoren und Auftragnehmer in Lüftungsprojekten passt sich die Lieferseite Ihrem Markt an statt einer festen Ventilatorkonstruktion.
For this model (Project fit VT125 / VT125-WF, Application single-room fresh-air renovation where 125-class wall installation is required), the OEM route can start from that base specification rather than a blank sheet.
Dokumente & Compliance
HRV certification documents are available for VT100 / VT125 / VT501 WiFi source scope.
Scope: Covers the VT100 / VT125 / VT501 WiFi HRV family scope stated in the source certificates.
- EU RED certificate
- EU RoHS certificate
- UKCA RED certificate
- IPX4 water-protection test report (ATJC23091280007202S)
Keep EU RED, UKCA RED and RoHS claims tied to the certificate model scope; confirm exact wireless variant before use.
Häufig gestellte Fragen
Can this replace a central ERV?
It is mainly a room-by-room retrofit option. For whole-building balanced ventilation, confirm a central ERV or multi-room design.
What must be checked before order?
Wall thickness, installation tube length, airflow step, control version, power supply and quantity.
Are the listed values final for every version?
No. The values are source-backed from PDF p.7; confirm the exact version and order configuration for quote review.
Download VT125 spec table (PDF)
What Buyers Say
Verifiziertes Käuferfeedback zu dieser Produktlinie aus dem KCVENTS-Einzelhandel der Gruppe. Wir veröffentlichen Bewertungen wie geschrieben, einschließlich kritischer Rückmeldungen, damit Sie das Produkt nach echter Erfahrung beurteilen können statt nach Werbetext.
Has a good quality feel to it. No thin, cheap plastic, and good choices of materials for the task. The inner part mounts on a metal plate and the housing snaps on with magnets, which makes maintenance easy. The outside cap has a rubber ring to seal the transition. Medium and high speeds really move some air but make some noise; the low speed is barely audible from a distance and the night mode is pretty quiet. Overall this is a high-quality, easy-to-use and easy-to-install ventilator that is quiet enough not to be distracting.
Reviews are for the VT125 heat-recovery ventilator and equivalent models in this series. Individual results vary with installation and site conditions.
Product inquiry
Bestätigen Sie die veröffentlichten Spezifikationen und fügen Sie dieses Produkt dann Ihrer Angebotsliste hinzu.
MARKETPLACE BUYER FEEDBACK
One buyer’s installation and operation experience
“I tested all the functions. Works well. The low speed is barely audible from some distance, and the night mode is pretty quiet. Overall, this matches what I hoped this product would be: easy to use and easy to install.”
| control-mode |
|---|






















