🎯 Trova il prodotto di ventilazione giusto
Chiedi alla nostra IA per HVAC — ottieni specifiche e consigli in pochi secondi
🔍
High Pressure Air Cabinet Fan
High Pressure Air Cabinet Fan
  1. High Pressure Air Cabinet Fan
  2. High Pressure Air Cabinet Fan

High Pressure Air Cabinet Fan

DT high-pressure cabinet fan for long-duct commercial kitchen and high-resistance exhaust systems

IDONEITÀ AL PROGETTO
DT high-pressure cabinet fan for long-duct commercial kitchen and high-resistance exhaust systems
RANGE DI PRESTAZIONI
4 models · 6,500–12,000 m³/h · 380V · static pressure 520–710 Pa · industrial-grade airflow
Aggiungi al preventivo
Selezione del ventilatore a cassetta

Panoramica di selezione del ventilatore a cassetta

High Pressure Air Cabinet Fan range for high-static-pressure cabinet ventilation with industrial-grade ducted airflow. Check the model table for airflow, static pressure, and dimensions before specifying.

Source: CHIC GROUP HVAC 2026 catalogue (p.29 plus PIM DT high-confidence rows · high-confidence PIM rows from Cabinet / Air Conditioning Fan Series.
Project fitDT high-pressure cabinet fan for long-duct or high-resistance ventilation
Modelli di esempioDT28-6000 / DT30-10000 / DT30-8000 / DT32-12000
Dettagli del progettoConfirm DT model, target airflow/static pressure, duct length, elbows, outlet size, voltage, motor location and maintenance access
Source note

Sono mostrate solo le righe ad alta affidabilità. I modelli non correlati per estrazione fumi sono esclusi da questo lotto Cabinet/KTJ/DT.

Documented checks

Verifiche dei modelli ad alta affidabilità

High Pressure Air Cabinet Fan technical and selection table
Modello Voltage Potenza W Portata d'aria m³/h Pressione statica Pa Rumorosità dB(A) Dimensioni uscita / filtro Fonte
DT28-6000 380 1500 6500-4800 520-710 64 405×285 13
DT30-10000 380 3000 10500-8500 720-800 70 430×300 13
DT30-8000 380 2200 8500-6500 640-740 67 430×300 13
DT32-12000 380 4000 12500-9000 740-850 73 405×330 13
Idoneità all'applicazione

Where this cabinet fan fits

Cabinet fans are selected when a project needs enclosed airflow, easier service access and a cleaner installation than an open fan. For kitchen or high-resistance routes, static pressure and oil/filter access matter as much as airflow.

Use the model table as a starting point, then confirm duct resistance, opening size and maintenance clearance for final selection.

Typical buyer checks

  • Airflow and static pressure at working point
  • Voltage/frequency and motor protection requirement
  • Inlet/outlet opening and filter size
  • Inspection door, oil/water drain and cleaning access
Selection guide

Cabinet fan selection guide

1. Define duty

General ventilation, filtered cabinet airflow, kitchen exhaust or long duct/high-pressure route.

2. Match airflow + pressure

Do not choose by airflow alone; static pressure and duct losses decide the usable model.

3. Check installation

Confirm opening size, cabinet dimensions, mounting space and maintenance clearance.

4. Confirm model

Send duct route, airflow target, voltage and site photos for quote review.

Confronta

KTJKTJ-GDT positioning

KTJ is suited to general cabinet ventilation, KTJ-G is better for filter/oil-management cabinet use, and DT high-pressure cabinet fans are better for longer or higher-resistance duct routes. HTFC smoke-exhaust products are a separate family and are not merged into this table.

Core Engineering Features

Cabinet Fan Selection Snapshot set against the published values on this page. Every point below is taken from this model’s own data.

Project fitDT high-pressure cabinet fan for long-duct or high-resistance ventilation
Modelli di esempioDT28-6000 / DT30-10000 / DT30-8000 / DT32-12000
Dettagli del progettoConfirm DT model, target airflow/static pressure, duct length, elbows, outlet size, voltage, motor location and maintenance access
Voltage380
Potenza W1500
Portata d'aria m³/h6500-4800

Quality Assurance & Warranty

Fan orders are checked at the factory before shipping, because published airflow and pressure only hold if the delivered unit matches its table row.

Applied to this model: Project fit DT high-pressure cabinet fan for long-duct or high-resistance ventilation, Sample models DT28-6000 / DT30-10000 / DT30-8000 / DT32-12000. These checks are run against that specification before the unit ships.

Airflow and pressure checkChecks cover motor start-up, impeller balance, airflow and static pressure verification, noise review and model-to-table parameter matching.
Documented complianceCE, RoHS and related files cover the listed fan families; see the documents section below.
Warranty supportWarranty for fan orders is confirmed with the quotation for your destination market.
Service parts for fansImpellers, motor capacitors, mounting brackets and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on ventilation projects, the supply side adapts to your market instead of one fixed fan build.

For this model (Project fit DT high-pressure cabinet fan for long-duct or high-resistance ventilation, Sample models DT28-6000 / DT30-10000 / DT30-8000 / DT32-12000), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for fan orders, including branded cartons and manual inserts.
Airflow and pressure variantsModel selection, motor power and voltage options are reviewed against your duct calculation.
Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.
Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.
Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Documenti & conformità

Download the high pressure air cabinet fan datasheet used for the technical values on this page, and review the relevant compliance documents.

Confirm the exact model, destination-market requirements and current documentation before quotation or project documentation.

View all certifications and compliance documents by product scope

Frequently asked questions

Posso selezionare solo in base alla portata d'aria?

No. La selezione del ventilatore da armadio deve includere pressione statica, percorso dei condotti, gomiti, dimensioni di ingresso/uscita e accesso per la manutenzione.

Sono elencati tutti i modelli?

No. La tabella mostra righe campione ad alta attendibilità dalla fonte PDF/PIM abbinata. Richiedi la scheda tecnica del modello esatto prima dell'ordine definitivo.

HTFC è incluso in questa pagina?

No. I ventilatori centrifughi da armadio per estrazione fumi HTFC richiedono una gestione separata della fonte e non devono essere mescolati con le tabelle dei ventilatori da armadio KTJ/DT.

Product inquiry

Confirm the published specifications, then add this product to your quote list.

modello

, , ,