🎯 Trova il prodotto di ventilazione giusto
Chiedi alla nostra IA per HVAC — ottieni specifiche e consigli in pochi secondi
🔍
1 to 2 Slim Inline Fan

1 to 2 Slim Inline Fan

1 to 2 Slim Inline Fan for splitting a single duct run into two outlets in compact residential duct systems

IDONEITÀ AL PROGETTO
1 to 2 Slim Inline Fan for splitting a single duct run into two outlets in compact residential duct systems
RANGE DI PRESTAZIONI
Single model · slim inline design · 1-to-2 duct split · compact duct ventilation
Aggiungi al preventivo
Confirmed inline duct fan selection

Panoramica di selezione

Use this page to confirm fit for 1 to 2 Slim Inline Fan. Model-specific parameters are maintained in the internal source database; final quotation still depends on exact duct diameter, route resistance and installation conditions.

Image note: use product photo for shape recognition only; confirm duct diameter and exact model row before engineering review.
Project fitcompact duct splitter / inline fan
Applicationone inlet to two outlet fresh-air or exhaust duct layouts
Dettagli del progettoConfirm duct diameter, route split, airflow target, branch balance, outlet type, voltage/frequency and noise target
Source note

Model-specific parameter rows are maintained in the internal source database. Do not copy values across unrelated duct fan pages.

1-to-2 Inline Fan Models

Values are transcribed from the cited catalogue page. Confirm project voltage, installation conditions and the exact model before ordering.

Modello Voltage Speed Alimentazione Portata d'aria Static pressure Noise Duct diameter
DPT10-11 (1T2) 220 V / 50 Hz H / L 28 / 23 W 160 / 130 m³/h 75 / 65 Pa 38 / 35 dB 100 mm
DPT10-11F (1T2) 220 V / 50 Hz H / L 30 / 26 W 200 / 180 m³/h 200 / 180 Pa 43 / 38 dB 100 mm
DPT10-34 (1T2) 220 V / 50 Hz H / L 42 / 34 W 400 / 320 m³/h 155 / 145 Pa 52 / 49 dB 150 mm

Source: CHIC HVAC 2026 Catalogue, p. 33.

Confirmed specification policy

Use the exact model row for selection

1 to 2 Slim Inline Fan technical and selection table
Spec item How to use it Buyer check
Portata d'aria Use the exact model-specific source row Match room volume and ventilation objective.
Static pressure Check against duct length, bends and outlet resistance Do not choose by airflow alone.
Noise Use the documented dBA value and installation context Confirm if the fan is near occupied areas.
Voltage/frequency Confirm before order Match local project power supply.
Idoneità all'applicazione

Where this inline duct fan fits

1 to 2 Slim Inline Fan is suited for one inlet to two outlet fresh-air or exhaust duct layouts where the buyer needs compact inline installation and a defined duct route.

For long duct runs, multiple bends, filter resistance or strict noise targets, confirm static pressure instead of selecting by nominal airflow only.

Send these details

  • Duct diameter and duct length
  • Number of bends and outlet type
  • Airflow target and noise limit
  • Voltage/frequency and quantity

Frequently asked questions

Can I choose by duct diameter only?

No. Duct diameter is only the starting point. Confirm airflow, static pressure, duct length and bends.

Why confirm static pressure?

Long ducts, filters and bends reduce actual airflow. Static pressure helps avoid under-selection.

What information is needed for quote?

Send duct diameter, route, airflow target, duct length, bends, outlet type, voltage/frequency, quantity and destination.

Core Engineering Features

1-to-2 Inline Fan Models set against the published values on this page. Every point below is taken from this model’s own data.

Project fitcompact duct splitter / inline fan
Applicationone inlet to two outlet fresh-air or exhaust duct layouts
Dettagli del progettoConfirm duct diameter, route split, airflow target, branch balance, outlet type, voltage/frequency and noise target
Voltage220 V / 50 Hz
SpeedH / L
Alimentazione28 / 23 W

Quality Assurance & Warranty

Fan orders are checked at the factory before shipping, because published airflow and pressure only hold if the delivered unit matches its table row.

Applied to this model: Project fit compact duct splitter / inline fan, Application one inlet to two outlet fresh-air or exhaust duct layouts. These checks are run against that specification before the unit ships.

Airflow and pressure checkChecks cover motor start-up, impeller balance, airflow and static pressure verification, noise review and model-to-table parameter matching.
Documented complianceCE, RoHS and related files cover the listed fan families; see the documents section below.
Warranty supportWarranty for fan orders is confirmed with the quotation for your destination market.
Service parts for fansImpellers, motor capacitors, mounting brackets and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on ventilation projects, the supply side adapts to your market instead of one fixed fan build.

For this model (Project fit compact duct splitter / inline fan, Application one inlet to two outlet fresh-air or exhaust duct layouts), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for fan orders, including branded cartons and manual inserts.
Airflow and pressure variantsModel selection, motor power and voltage options are reviewed against your duct calculation.
Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.
Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.
Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Product inquiry

Confirm the published specifications, then add this product to your quote list.







modello

, , ,