🎯 Trouvez le bon produit de ventilation
Demandez à notre IA CVC — obtenez des spécifications et une recommandation en quelques secondes
🔍
In-Line Series 2 Ways

In-Line Series 2 Ways

In-Line Series 2 Ways duct fan for two-route inline ventilation in split duct systems

ADÉQUATION AU PROJET
In-Line Series 2 Ways duct fan for two-route inline ventilation in split duct systems
PLAGE DE PERFORMANCES
Single model · 2-way inline · split duct ventilation · compact design
Contrôle industriel de l'humidité

Source-backed 2-way In-Line Series parameters

Source publiée : KCVENTS 2-way In-Line Series technical table. Confirm dual-outlet layout and operating point before quotation.

Modèle Voltage (V/Hz) Speed Puissance (W) Débit d'air (m³/h) Pression statique (Pa) Bruit (dB) Duct Diameter (mm)
DPT10-11(1T2) 220-50 H 23 160 75 38 100
DPT10-11F(1T2) 220-50 H 30 200 250 43 100
DPT10-34(1T2) 220-50 H 42 400 155 52 150

Aperçu de la sélection

In-Line Series 2 Ways est organisée ici comme une page produit HVAC industrielle destinée aux acheteurs. Utilisez cette page pour confirmer l'adéquation au projet, les vérifications de sélection et les détails de devis pour la sélection du produit.

Politique de performance et de spécifications

In-Line Series 2 Ways technical and selection table
Élément Facteurs de sélection Pourquoi c'est important
Exact model Confirm by model nameplate or datasheet Avoids mixing similar series or legacy SKUs
Airflow / capacity Confirm required duty point for quote review Keeps selection tied to the project condition
Installation Confirm mounting method, voltage/frequency and site restrictions Reduces mismatch during procurement

Typical Applications

Project fit

Industrial ventilation selection.

Procurement note

Use this page as a starting point, then confirm the exact model and datasheet with Linggongshare.

Source note

Numeric parameters should be finalized only from source records or the latest datasheet.

Facteurs de sélection

  1. Share the target application and installation location.
  2. Confirm exact model, voltage/frequency and duty requirement.
  3. Check whether any certificates, drawings or special materials are required.
  4. Send the confirmed model, site conditions and required documents for quotation.

Compare the options

Compare this product by exact model, duty point, installation method, site environment, support documents and after-sales requirements, not by title alone.

Core Engineering Features

Source-backed 2-way In-Line Series parameters set against the published values on this page. Every point below is taken from this model’s own data.

Project fitIndustrial ventilation selection.
Procurement noteUse this page as a starting point, then confirm the exact model and datasheet with Linggongshare.
Source noteNumeric parameters should be finalized only from source records or the latest datasheet.
Voltage (V/Hz)220-50
SpeedH
Puissance (W)23

Quality Assurance & Warranty

Fan orders are checked at the factory before shipping, because published airflow and pressure only hold if the delivered unit matches its table row.

Applied to this model: Project fit Industrial ventilation selection., Procurement note Use this page as a starting point, then confirm the exact model and datasheet with Linggongshare.. These checks are run against that specification before the unit ships.

Airflow and pressure checkChecks cover motor start-up, impeller balance, airflow and static pressure verification, noise review and model-to-table parameter matching.
Documented complianceCE, RoHS and related files cover the listed fan families; see the documents section below.
Warranty supportWarranty for fan orders is confirmed with the quotation for your destination market.
Service parts for fansImpellers, motor capacitors, mounting brackets and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on ventilation projects, the supply side adapts to your market instead of one fixed fan build.

For this model (Project fit Industrial ventilation selection., Procurement note Use this page as a starting point, then confirm the exact model and datasheet with Linggongshare.), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for fan orders, including branded cartons and manual inserts.
Airflow and pressure variantsModel selection, motor power and voltage options are reviewed against your duct calculation.
Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.
Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.
Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Documents & conformité

Download the In-Line Series 2 ways datasheet used for the technical values on this page, and review the relevant compliance documents.

Confirm the exact model, destination-market requirements and current documentation before quotation or project documentation.

View all certifications and compliance documents by product scope

Frequently Asked Questions

Can Linggongshare recommend a model directly?

Yes. Send the application, airflow or capacity target, installation constraints and power supply. The team can help narrow the model range.

Are all technical values final on this page?

For safety, final selection should be confirmed against the latest exact-model datasheet or source parameter record.

Product inquiry

Confirm the published specifications, then add this product to your quote list.

modèle

, ,