🎯 Найдите подходящий вентиляционный продукт
Спросите нашего ИИ по HVAC — получите характеристики и рекомендацию за секунды
🔍
DPT split functional duct fan for fresh air duct ventilation

Раздельный функциональный канальный вентилятор DPT | Канальная вентиляция приточного воздуха

A split-type duct fan for fresh-air and exhaust routes where duct path, ceiling space and service access need to be coordinated.

ДИАПАЗОН ПРОИЗВОДИТЕЛЬНОСТИ
Ceiling or service-area duct routes where split placement supports a planned installation layout.
Одна модель · канальный вентилятор · стандартная вентиляция · жилые и
Single model · DPT split design · fresh air duct ventilation · compact inline
Add to quote

DPT DUCT FAN FAMILY

Ducted Ventilation Starts with the Project Requirement

DPT split functional duct fans are a ducted ventilation product family. Select the exact model only after confirming the application, required airflow, duct route, available installation space and electrical supply.

This page is a family route. It does not publish a model-specific performance table because the exact DPT variant must be identified before technical values are applied.

Prepare a model review

MODEL REVIEW

Send the Conditions That Define the Exact DPT Model

ApplicationDescribe the room or project use and whether the route is fresh air, return air or ducted exhaust.
Air and duct routeProvide target airflow, duct diameter, route length, bends, outlets and available service space.
Electrical and project detailsProvide voltage / frequency, quantity, destination market and any document requirement.

Do not select a DPT variant by one generic noise, pressure or material statement. Final model and operating conditions require exact project confirmation.

DOCUMENTS AND COMPLIANCE

Confirm Scope for the Exact DPT Variant

This page does not identify a single exact DPT variant for a public drawing or certificate claim. Document applicability depends on the selected model, configuration and destination market.

Before procurement: send the selected DPT model, project requirement and destination market for drawing and document-scope confirmation.

Open the compliance document center

PROJECT INQUIRY

Request a DPT Project Review

Send the DPT product family, application, target airflow, duct route, voltage / frequency, quantity and destination market for model review.

Project Fit and Selection Inputs

Use this page to start a project review, not to approve a model from duct diameter alone. The final DPT variant should be confirmed against the required airflow, available static pressure, duct route, ceiling or service-space constraints, power supply and access for maintenance.

Send these details for a model review

  • Required airflow and target duty point.
  • Duct diameter, route length and the main bends, filters or grilles in the route.
  • Available installation space, access requirements and whether split placement is required.
  • Voltage, frequency and any project-specific electrical requirements.
  • Fresh-air or exhaust duty, operating schedule and installation location.

Technical Scope and Confirmation Boundary

This page describes a DPT split-type duct-fan concept for project review. Published performance data, dimensions, wiring information, installation requirements and compliance documents must be confirmed for the exact DPT variant before procurement.

Where the project requires a specific airflow, pressure, noise limit, control method or certification scope, include that requirement in the inquiry so the selected configuration can be checked against the correct source documentation.

Documents & Compliance

Download the inline split duct fan datasheet used for the technical values on this page, and review the relevant compliance documents.

Confirm the exact model, destination-market requirements and current documentation before quotation or project documentation.

View all certifications and compliance documents by product scope

Frequently Asked Questions

What should I confirm before selecting the DPT split-type duct fan?

Confirm the required airflow, duct route, installation space, service access, power supply and whether the duty is fresh-air supply or exhaust. These inputs are more useful than duct diameter alone.

Can the split layout be used where ceiling or service space is limited?

The split concept is intended for projects where component placement and service access need to be coordinated. Send the available space and route information so the exact variant and installation arrangement can be reviewed.

What should I include in a quote request?

Include the project location, duty type, target airflow, duct information, power supply, quantity, installation constraints and any required documents or compliance scope. We can then review the application before confirming the quotation route.

OEM/ODM & Supply Options

For distributors and contractors working on ventilation projects, the supply side adapts to your market instead of one fixed build.

OEM/ODMBadging, packaging and control options for fan orders, including branded cartons and manual inserts.
Airflow and pressure variantsModel selection, motor power and voltage options are reviewed against your duct calculation.
Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.
Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.
Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Request a DPT Project Review

Send the project conditions and required quantity for model review. The review should confirm the exact DPT variant, performance data, installation arrangement and documentation scope before procurement.