🎯 Найдите подходящий вентиляционный продукт
Спросите нашего ИИ по HVAC — получите характеристики и рекомендацию за секунды
🔍
HT-P30AG Portable Air Conditioner product image

HT-P30AG портативный кондиционер | Промышленное локальное охлаждение

Портативное точечное охлаждение 6800W (23000BTU) для промышленных рабочих зон

COOLING DUTY
Портативное точечное охлаждение 6800W (23000BTU) для промышленных рабочих зон
POWER CHECK
AC220V-50Hz; confirm circuit capacity before ordering
QUICK CHECK
Confirm exhaust route and datasheet details before quotation
Add to quote

Source-backed industrial portable air conditioner parameters

Source: KCVENTS Industrial Portable Air Conditioner technical table. Linggongshare model HT-P30AG is mapped to source label LG-P30 AG; spacing/prefix normalization only. Confirm voltage, destination-market configuration and final operating conditions before quotation.

Linggongshare modelSource modelVoltageCooling capacityRated powerNoiseAirflowWorking temperatureRefrigerantDehumidification capacityHumidity rangeDefrostingGross weight (kg)Product size (mm)Drainage
HT-P30AGLG-P30 AGAC220V-50Hz6800 Вт (23000 BTU)3000 Вт64 дБ(А)1200 м³/ч16℃-45℃R410A–––70610×540×1170Automatic Drainage
Portable industrial spot cooling

HT-P30AG Промышленный портативный кондиционер | Точечное охлаждение 3HP

HT-P30AG — это портативный промышленный кондиционер для точечного охлаждения рабочих мест, временных производственных зон, помещений с оборудованием и горячих цеховых зон.

Cooling capacity6800 Вт (23000 BTU)
Power supplyAC220V-50Hz
Machine class3 л.с.
Quick check: Portable AC performance depends on ambient temperature, exhaust duct routing, condensate handling and the distance between outlet air and operator position. Confirm the exact model datasheet before project approval.
Placement check: keep air intake and exhaust paths clear. Do not block outlet ducts or use the unit as a sealed-room HVAC replacement without heat exhaust planning.

Project details

Project flow

1Heat loadShare process heat, room size and operators near the unit.
2Exhaust routeConfirm hot-air exhaust path and condensate handling.
3Power checkConfirm voltage, plug/circuit capacity and movement route.
4Project detailsSend quantity, destination and documents needed.

Application fit

Where this model fits, and what to verify first

Best forWorkstations, production corners and temporary cooling zones.
Check firstDuct/exhaust path and hot-air discharge direction.
AvoidClosed rooms without heat exhaust planning.
Buyer notePortable AC solves spot heat, not whole-building HVAC design.

Model Specification

This is the exact model row from the cited catalogue page. Working temperature is 16–45°C and drainage method is automatic drainage in the same source row.

Модель Voltage Cooling capacity Rated power Airflow Noise Refrigerant Weight Size (mm)
HT-P30AG AC220 V / 50 Hz 6800 Вт (23000 BTU) 3000 W 1200 m³/h 64 dB(A) R410A 70 kg 610 × 540 × 1170

Source: Каталог CHIC HVAC 2026, стр. 52.

Technical Parameters

Model: HT-P30AG. Сверьте опубликованные ниже значения с проектной холодопроизводительностью, электропитанием, условиями окружающей среды и требованиями к работе с водой.
HT-P30AG Портативный кондиционер | Техническая таблица и таблица подбора для промышленного точечного охлаждения
Пункт Published value Project relevance
Модель HT-P30AG Original model code found in Linggong source table.
Machine type 3 л.с. Helps compare portable AC size class before checking cooling capacity.
Voltage / frequency AC220V-50Hz Must match site power supply before order confirmation.
Cooling capacity 6800 Вт (23000 BTU) Main sizing indicator for spot cooling duty.
Rated power 3000 W Useful for power planning and circuit load review.
Maximum power 3500 Вт Check peak load and safety margin.
Maximum current 15 A Electrical circuit and breaker sizing reference.
Air volume 1200 m³/h Helps estimate air circulation near the cooled workstation.
Noise 64 dB(A) Важно для цехов, где операторы находятся рядом с установкой.
Настройка времени 1-24 ч Полезно для временных рабочих смен и периодов охлаждения без присмотра.
Диапазон настройки температуры 16-31 °C Определяет выбираемый диапазон регулирования температуры на выходе/в помещении.
Working temperature 16-52 °C Проверьте температуру окружающей среды перед использованием в горячих цехах.
Моющийся фильтр ДА Снижает затраты на обслуживание в пыльных промышленных условиях.

Where This Portable AC Fits

Use this unit for localized cooling where operators, machines or temporary work zones need direct cooling without installing a full fixed air-conditioning system.

Typical uses include industrial workshops, warehouse picking zones, maintenance stations, temporary production lines, equipment-side cooling and rental/seasonal cooling projects.

  • Good fit: short-term or point cooling with clear exhaust route.
  • Project fit: ambient temperature, power supply and condensate handling.
  • Not enough alone: sealed-room cooling if hot exhaust cannot be discharged.

Selection guide Selection factors

  • Cooling target: confirm workstation size, heat source, operator distance and required cooling time.
  • Power supply: verify AC220V-50Hz compatibility and available circuit margin.
  • Air path: confirm intake clearance, cold-air outlet direction and hot-air exhaust routing.
  • Environment: check dust, humidity, water splash risk and ambient temperature range.
  • Model confirmation: use the exact model datasheet for final electrical, refrigerant and dimensional confirmation.

What NOT to Buy

HT-P30AG Портативный кондиционер | Техническая таблица и таблица подбора для промышленного точечного охлаждения
Situation Risk Better action
No exhaust path Hot air recirculates and cooling effect drops. Plan exhaust ducting or choose a fixed HVAC solution.
Wrong voltage Startup failure or electrical safety risk. Confirm site voltage/frequency for product selection.
Whole-room cooling expectation Portable spot coolers may not replace central HVAC. Use a larger fixed system or multiple units after load calculation.
Outdoor rain exposure Water ingress risk unless rated and installed for it. Use weather-protected equipment and check IP rating.

Portable Air Conditioner Buyer Checklist

Use the source-backed product information on this page as the starting point, then confirm site conditions before approving the final model.

  • Cooling target area and heat source intensity
  • Available voltage/frequency and socket/circuit capacity
  • Hot-air exhaust path, condensate handling and movement route
  • Quantity, delivery region and required documentation
Selection note

HT-P30AG предназначен для точечного охлаждения промышленных рабочих зон; перед выбором окончательного блока точечного охлаждения проверьте путь воздушного потока и отвод тепла.

FAQ

Can this portable AC cool an entire room?

It is mainly for spot cooling. Whole-room performance depends on room size, heat load and exhaust routing.

Can I use it in a dusty workshop?

Check filter maintenance and intake clearance. If the source row includes a washable filter, clean it regularly.

Is the source model different from the website model?

Some Linggong source tables use HT model codes while the current PIM layer uses LG model codes. The source model is shown above to avoid silent normalization.

Download product catalog PDF

Download the English product catalog PDF for HT-P30AG портативный кондиционер | Промышленное локальное охлаждение. Use it for model comparison, technical review and inquiry preparation.

Download catalog PDF

Use the exact model, voltage and installation conditions for project selection.

Core Engineering Features

Source-backed industrial portable air conditioner parameters set against the published values on this page. Every point below is taken from this model’s own data.

Cooling capacity6800 Вт (23000 BTU)
Power supplyAC220V-50Hz
Machine class3 л.с.
VoltageAC220V-50Hz
Rated power3000 Вт
Noise64 дБ(А)

Quality Assurance & Warranty

Portable air conditioner orders are checked at the factory before shipping, because spot-cooling performance depends on the unit matching its rated capacity and exhaust arrangement.

Применимо к этой модели.

Cooling output checkChecks cover compressor start-up, condensate handling, airflow, noise review and model-to-table parameter matching.
Documented complianceCE, RoHS and related files cover the listed portable cooling families; see the documents section below.
Warranty supportWarranty for portable air conditioner orders is confirmed with the quotation for your destination market.
Service parts for portable coolingFilters, castors, exhaust ducts and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on spot-cooling projects, the supply side adapts to your market instead of one fixed portable build.

Для этой модели (холодопроизводительность 6800 Вт (23000 BTU), электропитание AC220V-50Hz) путь OEM может начинаться с этой базовой спецификации, а не с чистого листа.

OEM/ODMBadging, packaging and control options for portable cooling orders, including branded cartons and manual inserts.
Capacity and supply variantsCooling capacity, refrigerant and voltage or plug configuration are reviewed for your market.
Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.
Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.
Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Product inquiry

Confirm the published specifications, then add this product to your quote list.

Contact sales