🎯 Найдите подходящий вентиляционный продукт
Спросите нашего ИИ по HVAC — получите характеристики и рекомендацию за секунды

Диагональный бустерный канальный вентилятор HF-75/100/125 | Компактный напорный канальный вентилятор

Compact diagonal inline booster fan series for small rooms, branch ducts and short duct runs.

FIT WINDOW
Small rooms, branch ducts and compact inline installations
PROOF ANCHOR
HF-75 / HF-100 / HF-125: 220–310 m³/h airflow and 150–180 Pa static pressure
NEXT STEP
Confirm duct size, route length, airflow target and supply voltage before model selection
Inline duct / booster ventilationConfirm airflow and duct resistanceUse model table before selection
Product overview

Обзор подбора диагонального бустерного канального вентилятора HF-75/100/125

Диагональный бустерный канальный вентилятор HF-75/100/125 помогает быстро отобрать задачи компактного встроенного наддува. Подтвердите трассу воздуховода, целевой расход, ограничения монтажа и данные техпаспорта конкретной модели до окончательного подбора.

Use case
Compact inline duct boosting for small rooms, branches and short duct runs.
Selection factor
Match airflow, duct resistance and installation space before choosing single-speed or dual-speed.
Buyer value
Send duct size, route length and supply voltage so the model can be checked correctly.
Quote helper
Send duct size, route length, airflow target and target model with your inquiry.



Compare the published performance values with duct resistance and installation space, then confirm the final model details for the project.

Installation Drawing and Dimensions of Fan

hf 75100125

Technical Parameter

Диагональный бустерный канальный вентилятор HF-75/100/125 | Компактный напорный канальный вентилятор, техническая таблица и таблица подбора
Модель Input Voltage(V) Input Current(A) Input Frequency(Hz) Power(W) Rated Speed(rpm) Air Volume(m³/h) Статическое давление (Па) Noise(dB) Size(mm)
HF-75 220 0.13 50 35 2600 220 150 31 L320×W165×H146
HF-100 220 0.13 50 35 2600 220 150 31 L320×W165×H146
HF-125 220 0.14 50 40 2600 310 180 34 L257×W200×H185

Две разные линейки канальных вентиляторов HF используют этот префикс

В опубликованном каталоге описаны два отдельных семейства, и в обоих используются названия моделей, начинающиеся с “HF”:

  • Диагональный канальный вентилятор-бустер — таблица HF-75 / HF-100 / HF-125 выше.
  • Канальный бесшумный вентилятор (смешанного потока) для трубопроводов — HF-100/125, HF-150 и HF-200.

Названия моделей, встречающиеся в обеих линейках (например, HF-100 and HF-150) имеют разные опубликованные значения расхода воздуха, статического давления и шума. Перед заказом уточните, какую линейку указывает ваш проект, и соответствующий лист технических данных.

Core Engineering Features

Обзор подбора диагонального бустерного канального вентилятора HF-75/100/125 в сопоставлении с опубликованными на этой странице значениями. Каждый пункт ниже взят из собственных данных этого модельного ряда.

Input Voltage(V)220
Input Current(A)0.13
Input Frequency(Hz)50
Power(W)35
Rated Speed(rpm)2600
Air Volume(m³/h)220

Quality Assurance & Warranty

Fan orders are checked at the factory before shipping, because published airflow and pressure only hold if the delivered unit matches its table row.

Applied to this model: Input Voltage(V) 220, Input Current(A) 0.13. These checks are run against that specification before the unit ships.

Airflow and pressure checkChecks cover motor start-up, impeller balance, airflow and static pressure verification, noise review and model-to-table parameter matching.
Documented complianceCE, RoHS and related files cover the listed fan families; see the documents section below.
Warranty supportWarranty for fan orders is confirmed with the quotation for your destination market.
Service parts for fansImpellers, motor capacitors, mounting brackets and common service items.

OEM/ODM & Supply Options

For distributors and contractors working on ventilation projects, the supply side adapts to your market instead of one fixed fan build.

For this model (Input Voltage(V) 220, Input Current(A) 0.13), the OEM route can start from that base specification rather than a blank sheet.

OEM/ODMBadging, packaging and control options for fan orders, including branded cartons and manual inserts.
Airflow and pressure variantsModel selection, motor power and voltage options are reviewed against your duct calculation.
Voltage & plug optionsVoltage and plug configuration for this product line can be reviewed during quotation.
Documentation & bulk supplyCatalogues, technical sheets, available certificates, volume pricing and distributor programs for this product line.
Order quantity & lead timeMinimum order quantity, sampling and production lead time are confirmed per model and order volume — see the B2B supply page for how sourcing enquiries are handled.

Documents & Compliance

Download the HF-75/100/125 diagonal booster duct fan datasheet (PDF) used for the technical values on this page.

Confirm the exact model and current documentation before quotation or project documentation.

Рекомендации по подбору диагонального бустерного канального вентилятора HF-75/100/125

Compare HF-75, HF-100 and HF-125 by input voltage, current, frequency, power, speed, airflow, pressure, noise and size before selecting a compact booster duct fan.

Related Linggong ventilation products

Frequently Asked Questions

Which models are included on this HF booster fan page?

Use this page when the project is still in the compact booster range and you need to compare HF-75, HF-100 and HF-125 in one table.

What airflow range do HF-75/100/125 fans cover?

Choose within this page when the duty stays in the 220–310 m³/h and 150–180 Pa compact booster range.

When should I upgrade to HF-150 or HF-200?

Upgrade to HF-150 or HF-200 when the duct run is longer, the airflow target is higher, or the required pressure is beyond the compact HF-75/100/125 range.

Product inquiry

Confirm the published specifications, then add this product to your quote list.